Jump to content Jump to navigation menu

High-pressure laboratory autoclaves model II Basic equipment, 200 ml autoclave beaker/100 bar

From  Carl ROTH
Material: stainless steel 1.4571 (V4A).
Related products
Designation


200/300 ml/100 bar, 250 ml/200 barModel II encompasses devices for all reactions where spontaneous gas development and a quick increase in pressure are to be expected. The devices are operated with a large bursting disc, that is incorporated in the autoclave head. They thus offer maximum operational safety. The enlarged autoclave head is screwed directly onto the cylindrical autoclave beaker. It contains the bursting disc holder at the top and three threaded openings at the side. For connections with: valves, reducers for pressure gauges and temperature sensors or burst disc safety device ll (when using magnetic stirrer head MRK 10).Threaded openings can be closed with screw stoppers. Sealed with PTFE gaskets (max. 180 °C) or pure silver gaskets (max. 300 °C).Depending on the scope of the autoclave system, delivery times may apply!
Product details

€1,118.00/Pack Qty. 

excl. VAT. | 1 unit(s) per Pack Qty.

Art. No. 2098.1

In stock
Delivery fast, simple and reliable!
from 6 Pack Qty. €1,062.10/Pack Qty.
from 24 Pack Qty. €1,006.20/Pack Qty.

Product details

Material: stainless steel 1.4571 (V4A).

200/300 ml/100 bar, 250 ml/200 barModel II encompasses devices for all reactions where spontaneous gas development and a quick increase in pressure are to be expected. The devices are operated with a large bursting disc, that is incorporated in the autoclave head. They thus offer maximum operational safety. The enlarged autoclave head is screwed directly onto the cylindrical autoclave beaker. It contains the bursting disc holder at the top and three threaded openings at the side. For connections with: valves, reducers for pressure gauges and temperature sensors or burst disc safety device ll (when using magnetic stirrer head MRK 10).Threaded openings can be closed with screw stoppers. Sealed with PTFE gaskets (max. 180 °C) or pure silver gaskets (max. 300 °C).Depending on the scope of the autoclave system, delivery times may apply!


Autoclave beakers 200 mm 300 ml 250 ml
Empty space (ml) 265 350 320
Working capacity (ml) 200 300 250
Height (mm) 220 300 300
Weight (g) 1375 1900 2250
Max. working pressure (bar) 100 100 200
Test pressure at +20 °C (bar) 300 300 400
Outside Ø (mm) 50 50 50
Inside Ø (mm) 40 40 37
Bottom shape flat outside and inside
Material V4A stainless steel 1.4571
Working temperature -60 to +300 °C


High-pressure laboratory autoclaves model II Basic equipment 

Technical Information
Designation 200 ml autoclave beaker/100 bar 
High-pressure laboratory autoclaves model II Basic equipment
Selected quantity:   0
  1. Subtotal:  0.00
Art. No. Designation Pack Qty. Price Quantity
2098.1 200 ml autoclave beaker/100 bar 1 unit(s)

€1,118.00

2108.1 300 ml autoclave beaker/100 bar 1 unit(s)

€1,555.55

2094.1 250 ml autoclave beaker/200 bar 1 unit(s)

€1,143.80

2126.1 Autoclave head II 1 unit(s)

€724.55

In stock
Available
In procurement
No longer available
Delivery date currently unknown
Selected quantity:   0
  1. Subtotal:  0.00

Downloads / MSDS

General information

OVERVIEWHigh-pressure laboratory autoclaves from ROTH

Model 0 Model I Model II Model IV
Max. working volume (ml) 50 100 200 300 250 500
Max. working pressure (bar) 100 100 100 100 200 100
Heating mantle none 10 S 20 S 30 S 30 S 50 S
Sampling possible no no yes yes
Stirrer connection possible no no yes yes
Temp. measurement in autoclave possible no no yes yes

Attention

Due to the shape of the screw thread, cold setting of cylinder and head is possible when screwing these on. This usually leads to them sticking when opening and the thread breaking as a result.The conducted reaction necessitates coating the thread with a release agent such as PTFE spray (Art. No. K007.1).Warning: Do not use PTFE screw thread tape!


Advice for working with silver gaskets

When working with silver gaskets, it is essential to tighten the screw threads very tightly to achieve the necessary seat. We therefore recommend annealing the silver gaskets at +850 °C before use - the gaskets remain softer and more pliable, even when cool, and seal more efficiently.