Jump to content Jump to navigation menu

n-Hexane

ROTISOLV® ≥95 %, GC Ultra Grade
Examples of effect: Flammable; liquids form compounds with the air which can become explosive; produce flammable gases with water or can self-combust. Safety: Keep away from open flames and sources of heat; close containers tightly; store in a fire-safe manner.
Examples of effect: Lead to damage to heath, cause irritation to eyes, skin or respiratory organs. Are fatal in larger quantities. Safety: As previously stated, in the event of skin irritation or contact with eyes, rinse with water or a suitable medium.
Examples of effect: Have an allergenic effect, carcinogenic, mutagenic, toxic to reproduction and cause developmental toxicity (reprotoxic) or damage to organs Safety: You must be well-informed before starting work with these substances; wear protective clothing and gloves, eye protection and mask or breathing protection.
Examples of effect: Are harmful to aquatic organisms, toxic or highly toxic, acute or with long-term effects. Safety: To be disposed of as hazardous waste only, do not allow into the environment under any circumstances.
Danger
H225-H304-H315-H336-H361f-H373-H411
i highly flammable liquid and vapour, may be fatal if swallowed and enters airways, causes skin irritation, may cause drowsiness or dizziness, suspected of damaging fertility, may cause damage to organs (nervous system) through prolonged or repeated exposure (if inhaled), toxic to aquatic life with long lasting effects
P202 P280 P303+P361+P353 P304+P340 P308+P313
i do not handle until all safety precautions have been read and understood, wear protective gloves/eye protection, IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower], IF INHALED: Remove person to fresh air and keep comfortable for breathing, IF exposed or concerned: Get medical advice/attention
Related products
Pack Qty.
Pack.
Empirical formula C6H14
Molar mass (M) 86,18 g/mol
Density (D) 0,66 g/cm³
Boiling point (bp) 69 °C
Flash point (flp) -22 °C
Melting point (mp) -95 °C
ADR 3 II
WGK 3
CAS No. 110-54-3
EG-Nr. 203-777-6
UN-Nr. 1208

For gaschromatographic residue analysis.

€145.15 /Pack Qty.

€108.80/Pack Qty.  Campaign price!

excl. VAT. | 2.5 l per Pack Qty.

Art. No. KK48.1

In stock
Delivery fast, simple and reliable!

Product details



n-Hexane ROTISOLV® ≥95 %, GC Ultra Grade

Technical Information
Water miscibility no 
n-Hexane
Selected quantity:   0
  1. Subtotal:  0.00
Art. No. Pack Qty. Pack. Price Quantity
KK48.1 2.5 l glass
€145.15

€108.80

In stock
Available
In procurement
No longer available
Delivery date currently unknown
Selected quantity:   0
  1. Subtotal:  0.00

Downloads / MSDS


General information

Further attractive products to complete your chromatography laboratory can be found on our Chromatography page!


Determination of the Hydrocarbon Index

The hydrocarbon index is defined as the total of all organic substances that can be extracted with hexane, but cannot be adsorbed in Florisil® (magnesium silicate). On a covalent GC column, these elute between n-decane and n-tetracontane and have a boiling range of 175-525 °C. These include heating oils, diesel fuels, kerosene, lubricants and transmission fluids. Petrols are not detected using this method. Carl ROTH offers an extensive range of products for the determination of the hydrocarbon index in accordance with EN ISO 9377-2-Mod. (DIN H53).

Standards

According to EN ISO 9377-2-Mod. (DIN H53)

  • Manufactured in accordance with ISO 17034 in an accredited environment
  • Tested in a laboratory accredited to ISO/IEC 17025
  • Ideal for calibration of GC-FID, GC-TCD, GC-ECD, GC-MS, GC-MS/MS, LC-UV, LC-MS and LC-MS/MS
  • With an detailed, batch-related certificate of analysis


ROTISOLV® GC Ultra Grade Solvents

for gaschromatographic and residue analysis

In order to monitor and analyse environmentally relevant substances such as pesticides, dioxins, furans, PAH, PCB etc. in trace analysis, solvents with exceedingly high purity specifications are required.
Carl ROTH’s ROTISOLV® GC Ultra Grade solvents have been developed specially for this application area and are produced with the most sophisticated production processes. Extensive quality checks guarantee the same high-grade quality from batch to batch.



Properties:

  • Highest purity
  • Very low water content
  • Non-volatile matter less than 2 ppm
  • Quality control by means of ECD and NPD
  • PAH-test
  • Filtered through 0,2 μm membrane
  • Bottled under protective gas


Certificates of Analysis

You can search for and download your certificate of analysis for the selected product here. Please provide your batch number.
The following analysis certificates have been found:

Guarantee analysis

Assay (GC)≥95 %
Colour (APHA)≤10
Water (KF)≤0,005 %
Free acid (as CH3COOH)≤0,001 %
Evaporation residue≤0,0001 %
GC/ECD dioxins, furans and PCBs (as lindane)≤5 ng/l
GC/ECD pesticides (as lindane)≤3 ng/l
GC/NPD pesticides (as parathion)≤5 ng/l
PAH-test (less than 2 ppb, HPLC)complies
Filtered through a 0.2 μm membrane and filled under protective gas.