Jump to content Jump to navigation menu

Technical Data Sheet
NEW
372A 372A_1

DEGRAD INX© X100
From  BIO INX©
for Multiphoton Lithography (MPL)
Icon_Kuehltransport The products marked accordingly are shipped refrigerated in special, sustainable cooling boxes with cooling packs or dry ice.
Icon_BIO-INX_Logo-RGB
Icon_EVE-EUD Please consider that this product might be liable to some legal sanctions as for example to obtain an end user declaration or the prohibition of some applications. For details please do contact your counterpart in our sales department!
Examples of effect: Flammable; liquids form compounds with the air which can become explosive; produce flammable gases with water or can self-combust. Safety: Keep away from open flames and sources of heat; close containers tightly; store in a fire-safe manner.
Examples of effect: Damage metals and burn body tissues; may cause serious eye damage. Safety: Avoid contact; wear safety spectacles and gloves. In the event of contact with eyes and skin, rinse with water.
Examples of effect: Lead to damage to heath, cause irritation to eyes, skin or respiratory organs. Are fatal in larger quantities. Safety: As previously stated, in the event of skin irritation or contact with eyes, rinse with water or a suitable medium.
Examples of effect: Have an allergenic effect, carcinogenic, mutagenic, toxic to reproduction and cause developmental toxicity (reprotoxic) or damage to organs Safety: You must be well-informed before starting work with these substances; wear protective clothing and gloves, eye protection and mask or breathing protection.
Examples of effect: Are harmful to aquatic organisms, toxic or highly toxic, acute or with long-term effects. Safety: To be disposed of as hazardous waste only, do not allow into the environment under any circumstances.
Danger
H225-H302-H315-H317-H318-H335-H336-H351-H410
i highly flammable liquid and vapour, harmful if swallowed, causes skin irritation, may cause an allergic skin reaction, causes serious eye damage, may cause respiratory irritation, may cause drowsiness or dizziness, suspected of causing cancer, very toxic to aquatic life with long lasting effects
P210 P280
i keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking, wear protective gloves/eye protection/face protection
Related products
Pack Qty.
Bioink
Density (D) ~1 g/cm³
Boiling point (bp) 56,05 °C
Flash point (flp) -17 °C
Storage temp. +2 to +8 °C
Transport temp. cooled
ADR 9 II
WGK 1
UN-Nr. 3316

Suitable for Multiphoton Lithography (MPL) based bioprinting
Synthetic Bioresin for 3D Bioprinting

DEGRAD INX© X100 is a polyester-based synthetic resin for multiphoton lithography based 3D-printing applications. It is the first ever biodegradable ink that combines the benefits of biocompatibility, flexibility and easy processability resulting in high feature resolutions (< 500 nm).

DEGRAD INX© X100 ready-to-use formulations can be processed via a multiphoton lithography based printer after a short pre-heating process. The resin can be processed at high scanning speeds (up to 100 mm/s) which is favorable for shorter fabrication times.
Product details

€376.25/Pack Qty. 

excl. VAT. | 1 kit per Pack Qty.

Art. No. 372A.1

Available
Additional transportation costs apply for this item.
Ready for dispatch in 1-2 weeks
from 6 Pack Qty. €357.44/Pack Qty.
from 24 Pack Qty. €338.62/Pack Qty.

Alternative products

NEW
371X
SOLID INX© X100
for Material Extrusion (FDM/FFM)
Art. No. 371X.1
€107.50  /  3  ml 
NEW
371Y
DEGRES INX© X100
for Digital Light Projection (DLP)
from €344.00

Fits to / Accessories

Gruppe_EMEM
ROTI®Cell Eagle’s MEM / Earle’s
CELLPURE® ready-to-use, sterile, with glutamine
Art. No. 9044.1
€16.70  /  500  ml 
Gruppe_DMEM
ROTI®Cell DMEM High Glucose
CELLPURE® ready-to-use, sterile, with stable glutamine, with pyruvate
Art. No. 9007.1
€19.90  /  500  ml 
Gruppe_PBS
ROTI®Cell PBS
CELLPURE® ready-to-use, sterile, w/o Ca/Mg
from €18.20

Product details


CURASOL© technology

CURASOL© addresses some of the processing limitations related to traditional photo-crosslinkable polymers by offering an excellent printing fidelity by printing from the molten state along with an efficient crosslinking. Thanks to the CURASOL© technology, UV-induced crosslinking of inks in the solid state occurs 5 times faster compared to the inks in the molten state, thereby offering reduced irradiation times. The printed scaffolds offer stable or biodegradable platforms for cell seeding that can be implemented for harder tissues (e.g. cartilage).



DEGRAD INX© X100 for Multiphoton Lithography (MPL)

DEGRAD INX© X100 is a polyester-based synthetic resin for multiphoton lithography based 3D-printing applications. It is the first ever biodegradable ink that combines the benefits of biocompatibility, flexibility and easy processability resulting in high feature resolutions (< 500 nm).

DEGRAD INX© X100 ready-to-use formulations can be processed via a multiphoton lithography based printer after a short pre-heating process. The resin can be processed at high scanning speeds (up to 100 mm/s) which is favorable for shorter fabrication times.

Compatible with:
  • Upnano NanoOne
  • Upnano NanoOneBio
  • Nanoscribe Photonic Professional GT2

The kit contains
  • Vial of resin (1 ml)
  • Large vial of developer (120 ml)
  • Custom-made BIO INX floater

Publications

Kopinski-Grünwald O. et al. "Scaffolded spheroids as building blocks for bottom-up cartilage tissue engineering show enhanced bioassembly dynamics" - Acta Biomaterialia (2024)

Zhang M. et al. "Hydrogel muscles powering reconfigurable micro-metastructures with wide-spectrum programmability" - Nature Materials (2023)

Guillaume O. et al. "Hybrid Spheroid Microscaffolds as Modular Tissue Units to Build Macro-Tissue Assemblies for Tissue Engineering." - Acta Biomaterialia (2022)

Gréant C. et al. "Multiphoton Lithography as a Promising Tool for Biomedical Applications." - Advanced Functional Materials (2023)

Advantages:
  • Biodegradable polyester
  • Highest resolution (<500 nm)
  • Very strong and flexible
  • Easy to process (CURASOL©)


Not a medical device / Not an IVD product
Technical Information
Appearance Yellow-orange liquid 
Material synthetic 
Refractive index 1.46 - 1.48  
Viscosity 0.5 - 3 Pa·s
Youngs modulus 50 - 60 MPa
Tensile strength 5 - 10 MPa
Elongation at Break 20 - 30 %
Pack Qty. 1 kit
Application No cell interaction 
DEGRAD INX© X100
Selected quantity:   0
  1. Subtotal:  0.00
Art. No. Pack Qty. Price Quantity
372A.1 1 kit

€376.25

In stock
Available
In procurement
No longer available
Delivery date currently unknown
Selected quantity:   0
  1. Subtotal:  0.00

Downloads / MSDS

Technical Information / English
Instruction / English
Specification / English
Security datasheet
International / English

General information

GEL-MA INX©X100 GEL-MA INX©X210 GEL-MA INX©X100 X-Pure EASYGEL INX©X100 SOLID INX©X100 READYGEL INX©X100 BIORES INX©X100 DEGRES INX©X100 HYDROBIO INX©X100 HYDROBIO INX©X400 HYDROTECH INX©X200 DEGRAD INX©X100
Technology FDM FDM FDM FDM FDM VBP DLP DLP MPL MPL MPL MPL
Material Nat. Nat. Nat. Nat. Synth. Nat. Nat. Synth. Nat. Nat. Synth. Synth.
Hydrogel +

+ +

+ +

+ + +

Cell Seeding + + + +

+ + + + +

Cell Encapsulation + + + +

+

+

No Cell Interaction

+

+ +
Biodegradability + + + + + + + + + +

+
Flexibility

+

+++

+++ ++
Stiffness

+

+

+++ ++
Resolution + + + + + ++ +++ +++ ++++ ++++ ++++ +++++
Writing Speed

+++ + + ++ ++ ++ ++
GMP-like + Low Endo

+

Shape Memory

+

+

Shear Thinning

+

CURASOL© (< 65°C)

+

+
Art. No. 371L 371N 371P 371T 371X 3721 387L 371Y 372C 372H 372E 372A