Jump to content Jump to navigation menu

Dialysis membrane Spectra/Por® 7 MWCO 8000, 18 mm

From  Repligen
Material: cellulose, regenerated.
Related products
MWCO
Surface width
Packaging


€403.15/Pack Qty. 

excl. VAT. | 1 unit(s) per Pack Qty.

Art. No. E863.1

In procurement
from 6 Pack Qty. €382.99/Pack Qty.
from 24 Pack Qty. €362.84/Pack Qty.

Product details

Material: cellulose, regenerated.

  • Packaged moist in 0.05% sodium azide solution, on rolls
  • Highly pure membranes without trace elements such as heavy metals, sulphides, glycerine
  • Can be used without the need for complex cleaning processes
  • Recommended storage temperature +4 °C
  • Max. application temperature +60 °C


Dialysis membrane Spectra/Por® 7 MWCO 8000 

Not a medical device / Not an IVD product
Technical Information
MWCO 8000 dalton(s)
Surface width 18 mm
Ø 11.5 mm
Wall thickness 60–65 µm
Packaging type roll 
Dialysis membrane Spectra/Por® 7 MWCO 8000
Selected quantity:   0
  1. Subtotal:  0.00
Art. No. MWCO Surface width Packaging Pack Qty. Price Quantity
E862.1 8000 Dalton 12 mm 5 m 1 unit(s)

€403.15

E867.1 8000 Dalton 50 mm 5 m 1 unit(s)

€403.15

E864.1 8000 Dalton 24 mm 5 m 1 unit(s)

€403.15

E863.1 8000 Dalton 18 mm 5 m 1 unit(s)

€403.15

E865.1 8000 Dalton 32 mm 5 m 1 unit(s)

€403.15

E866.1 8000 Dalton 40 mm 5 m 1 unit(s)

€403.15

In stock
Available
In procurement
No longer available
Delivery date currently unknown
Selected quantity:   0
  1. Subtotal:  0.00

Downloads / MSDS

No documents available

General information

Microdialysis by Membrane Filter (Drop Dialysis)

Microvolumes of sample (5-100 μl) can also be dialysed by membrane filter discs made of cellulose mixed ester (pore size 0,025 μm, Art. No. CY35.1-CY37.1): Fill a Petri dish with dialysis buffer. Place the membrane filter disc on the surface of the solution (shiny side up, avoid bubbles under the filter) by using a stainless steel forceps. Float the membrane for ca. 5 min until it is completely soaked. Pipette the sample on the center of the filter. Due to the open pore structure of the membrane filter and the high surface-to-volume ratio the dialysis is done within a short time (mostly < 30 min). To avoid evaporation of the sample seal the Petri dish tightly during the procedure. In this way the sample volume remains nearly constant.


Filling volume for 15 cm tube length

Broadth (mm) 8 10 12 18 25 32 40 45 50 76 100 120
Tube Ø (mm) 5 6 8 11 16 20 25 29 32 48 64 76
Filling volume (ml) 3,1 4,8 7 15 30 49 76 97 119 276 478 688

Attention:

Do not tie knots in regenerated cellulose. Closure clips must be used to avoid any changing of membrane or MWCO.


Appearance of dialysis membranes

Dry dialysis membranes have different appearances, dependent on pore size and wall thickness: Clear, opaque or even completely white.

Reason:

Larger MWCO membranes are made slightly thicker to maintain membrane strength when the pores are larger.

The thicker the membrane and larger the pores, the more opaque. So the different membranes look as follows:

Dry membranes with MWCO

100-1000: clear

3 500-5 000: mostly clear

8 000-10 000: slightly opaque

20 000-50 000: opaque

≥100 000: white.

When the membrane is wetted with water the effect dissapears and the membrane becomes more clear.