Jump to content Jump to navigation menu

Trial kit Spectra/Por® Biotech CE, 8000–10000 dalton(s)

From  Repligen
Material: CE.
MWCO
Surface width
Packaging


Hose membrane pieces on rolls, packaged moist in 0.05% sodium azide solution. Particularly suitable for dialysis where only a small amount of tubing is required (test runs, small-scale applications, etc.).
Product details

€183.85/Pack Qty. 

excl. VAT. | 1 unit(s) per Pack Qty.

Art. No. 4583.1

In procurement
from 6 Pack Qty. €174.66/Pack Qty.
from 24 Pack Qty. €165.46/Pack Qty.

Product details

Material: CE.

Hose membrane pieces on rolls, packaged moist in 0.05% sodium azide solution. Particularly suitable for dialysis where only a small amount of tubing is required (test runs, small-scale applications, etc.).



Trial kit Spectra/Por® Biotech CE 

Not a medical device / Not an IVD product
Delivery incl. 1 pair of Spectra/Por® universal locking clips (red, seal length 50 mm).
Technical Information
MWCO 8000–10000 dalton(s)
Surface width 16 mm
Ø 10 mm
Packaging type roll 
Trial kit Spectra/Por® Biotech CE
Selected quantity:   0
  1. Subtotal:  0.00
Art. No. MWCO Surface width Packaging Pack Qty. Price Quantity
4585.1 50000 Dalton 16 mm 1 m 1 unit(s)

€183.85

4583.1 8000–10000 Dalton 16 mm 1 m 1 unit(s)

€183.85

4587.1 300000 Dalton 16 mm 1 m 1 unit(s)

€183.85

4567.1 3500–5000 Dalton 16 mm 1 m 1 unit(s)

€183.85

4558.1 500–1000 Dalton 16 mm 1 m 1 unit(s)

€183.85

4588.1 1000000 Dalton 16 mm 1 m 1 unit(s)

€183.85

4556.1 100–500 Dalton 16 mm 1 m 1 unit(s)

€183.85

4586.1 100000 Dalton 16 mm 1 m 1 unit(s)

€183.85

4584.1 20000 Dalton 16 mm 1 m 1 unit(s)

€183.85

In stock
Available
In procurement
No longer available
Delivery date currently unknown
Selected quantity:   0
  1. Subtotal:  0.00

Downloads / MSDS

No documents available

General information

Microdialysis by Membrane Filter (Drop Dialysis)

Microvolumes of sample (5-100 μl) can also be dialysed by membrane filter discs made of cellulose mixed ester (pore size 0,025 μm, Art. No. CY35.1-CY37.1): Fill a Petri dish with dialysis buffer. Place the membrane filter disc on the surface of the solution (shiny side up, avoid bubbles under the filter) by using a stainless steel forceps. Float the membrane for ca. 5 min until it is completely soaked. Pipette the sample on the center of the filter. Due to the open pore structure of the membrane filter and the high surface-to-volume ratio the dialysis is done within a short time (mostly < 30 min). To avoid evaporation of the sample seal the Petri dish tightly during the procedure. In this way the sample volume remains nearly constant.


Filling volume for 15 cm tube length

Broadth (mm) 8 10 12 18 25 32 40 45 50 76 100 120
Tube Ø (mm) 5 6 8 11 16 20 25 29 32 48 64 76
Filling volume (ml) 3,1 4,8 7 15 30 49 76 97 119 276 478 688

Attention:

Do not tie knots in regenerated cellulose. Closure clips must be used to avoid any changing of membrane or MWCO.


Appearance of dialysis membranes

Dry dialysis membranes have different appearances, dependent on pore size and wall thickness: Clear, opaque or even completely white.

Reason:

Larger MWCO membranes are made slightly thicker to maintain membrane strength when the pores are larger.

The thicker the membrane and larger the pores, the more opaque. So the different membranes look as follows:

Dry membranes with MWCO

100-1000: clear

3 500-5 000: mostly clear

8 000-10 000: slightly opaque

20 000-50 000: opaque

≥100 000: white.

When the membrane is wetted with water the effect dissapears and the membrane becomes more clear.