Technical Data Sheet
Murexide (C. I. 56085), 5 g
Molar mass (M) 284,19 g/mol
Melting point (mp) >300 °C
WGK 1
CAS No. 3051-09-0
EG-Nr. 221-266-6
freshly made saturated solution in water
€27.95/Pack Qty. Campaign price!
excl. VAT. | 5 g per Pack Qty.
Art. No. T124.1
Product details
Murexide (C. I. 56085) ACS
Determination of |
Ag Ca Co Cu Mn Ni Sc Th Zn |
- Subtotal: 0.00
Art. No. | Pack Qty. | Pack. | Price | Quantity | |
---|---|---|---|---|---|
T124.1 | 5 g | glass |
€34.95
€27.95 |
|
|
T124.2 | 25 g | glass |
€80.55
€64.35 |
|
|
T124.3 | 50 g | glass |
€134.40
€107.50 |
|
|
In stock
Available
In procurement
No longer available
Delivery date currently unknown
|
- Subtotal: 0.00
Downloads / MSDS
General information
Indicators and Dyes
Carl ROTH offers many indicators and dyes of high purity, which can be used in special applications.
Determination of Water Hardness
Water contains a whole host of salts and other compounds in addition to the gases dissolved in it (oxygen, nitrogen, carbon dioxide). Its most important constituents are magnesium and calcium in the form of their chlorides, sulphates and bicarbonates. These dissolved salts are known as hardeners. The bicarbonates precipitate in the heat (during boiling) as carbonates and are known as carbonate hardness or temporary hardness. The sulphate and chloride compounds are known as permanent hardness or non-carbonate hardness. Total hardness describes the concentration of alkaline earth metal ions in water.
The unit of measurement for water hardness used to be 1 °dH (German degrees of hardness), which corresponds to 10,00 mg CaO or 7,19 mg MgO in one litre of water. Today we use millimoles per litre (mmol/l), whereby 1 °dH corresponds to 0,18 mmol/l of earth metal ions and 1 mmol/l corresponds to 5,6 °dH.
Certificates of Analysis
Guarantee analysis
Loss on drying | ≤2,0 % |
Suitability as indicator for complexometry | complies |