HPLC Guard Columns (analytical) NUCLEODUR® 100-3 C18 ec 4x3 mm, 4 x 3 mm
€149.45/Pack Qty.
excl. VAT. | 3 unit(s) per Pack Qty.
Art. No. 1K1P.1
Product details
For protection of your main HPLC column from contamination, it is recommended to use guard columns. These short columns are placed into a guard column holder. The guard column holder in combination with a guard column inside is installed between the injector and the HPLC column. This installation prevents chemical impurities to reach the main column. Because a contamination could form an irreversible bond with the column packing material (stationary phase) and this can result in shorter column life. If you want to prolong the lifetime of your main column, then these short columns can help you.
Further attractive products to complete your chromatography laboratory can be found on our Chromatography page!
HPLC Guard Columns (analytical) NUCLEODUR® 100-3 C18 ec 4x3 mm
| Column inner diameter | 3 mm |
| Column length | 4 mm |
| L x Ø internal (column) | 4 x 3 mm |
| Endcapped | yes |
| Eluent in column | Acetonitrile - Water |
| Surface chemistry | Medium density monomeric octadecyl (C18, ODS) modification |
| Separation principle | Reversed phase (RP) |
| Particle type | Fully porous particles (FPP) |
| Particle size | 3 µm |
| Specific surface according to BET | 340 m²/g |
| Pore volume | 0.9 ml/g |
| Pore size | 110 Å |
| Temperature stability | 60 ° C |
| pH stability | 1,0-9,0 |
| Carbon content | 17.5 % |
- Subtotal: 0.00
| Art. No. | L x Ø internal (column) | Pack Qty. | Price | Quantity | |
|---|---|---|---|---|---|
| 1K1P.1 | 4 x 3 mm | 3 unit(s) |
€149.45 |
|
|
|
In stock
In procurement
No longer available
Delivery date currently unknown
|
|||||
- Subtotal: 0.00
Downloads / MSDS
General information
Further attractive products to complete your chromatography laboratory can be found on our Chromatography page!