Test strips Aquadur®
Goods manufactured in Germany
€27.95/Pack Qty.
excl. VAT. | 100 unit(s) per Pack Qty.
Art. No. C725.1
Product details
Quick test to guide semi-quantitative determination of water hardness (total hardness).Measuring range of 0 °d to more than 25 °d. Conversion: 1 °d = 1.8 °f = 1.25 °e = 17.8 mg/l CaCO3.One box contains 100 test strips W 6 x L 95 mm.
Application:The test strip is briefly dipped into the water to be measured. After approximately one minute, the colouring that has appeared can be compared to a colour scale and the hardness range can be determined.Caution: The test paper must not come into contact with fingers.
Test strips Aquadur®
| Verification of | Water hardness (total hardness) |
| Gradation | <3 °d, >5 °d, >10 °d, >15 °d, >20 °d, >25 °d µg/m³ |
- Subtotal: 0.00
| Art. No. | Pack Qty. | Price | Quantity | ||
|---|---|---|---|---|---|
| C725.1 | 100 unit(s) |
€27.95 |
|
||
|
In stock
In procurement
No longer available
Delivery date currently unknown
|
|||||
- Subtotal: 0.00
Downloads / MSDS
General information
Determination of Water Hardness
Water contains a whole host of salts and other compounds in addition to the gases dissolved in it (oxygen, nitrogen, carbon dioxide). Its most important constituents are magnesium and calcium in the form of their chlorides, sulphates and bicarbonates. These dissolved salts are known as hardeners. The bicarbonates precipitate in the heat (during boiling) as carbonates and are known as carbonate hardness or temporary hardness. The sulphate and chloride compounds are known as permanent hardness or non-carbonate hardness. Total hardness describes the concentration of alkaline earth metal ions in water.
The unit of measurement for water hardness used to be 1 °dH (German degrees of hardness), which corresponds to 10,00 mg CaO or 7,19 mg MgO in one litre of water. Today we use millimoles per litre (mmol/l), whereby 1 °dH corresponds to 0,18 mmol/l of earth metal ions and 1 mmol/l corresponds to 5,6 °dH.