Jump to content Jump to navigation menu

EDTA disodium salt solution, 1 l, plastic

0,1 mol/l - 0,1 N, volumetric standard solution
Examples of effect: Damage metals and burn body tissues; may cause serious eye damage. Safety: Avoid contact; wear safety spectacles and gloves. In the event of contact with eyes and skin, rinse with water.
Warning
H290
i may be corrosive to metals
P234 P390 P406
i keep only in original packaging, absorb spillage to prevent material damage, store in a corrosion-resistant container with a resistant inner liner
Related products
Pack Qty.
Pack.
Titration complex III-solution, Ethylenediamine tetraacetic acid disodium salt solution, Sodium EDTA solution
Empirical formula C10H14N2Na2O8 · 2 H2O
Molar mass (M) 372,24 g/mol
Density (D) 1,019 g/cm³
Boiling point (bp) ~100 °C
ADR 8 III
WGK 1
CAS No. 6381-92-6
EG-Nr. 205-358-3
UN-Nr. 1824

For metal titration.

€28.95/Pack Qty. 

excl. VAT. | 1 l per Pack Qty.

Art. No. K714.1

In stock
Delivery fast, simple and reliable!
from 6 Pack Qty. €27.50/Pack Qty.
from 24 Pack Qty. €26.06/Pack Qty.
EDTA disodium salt solution
Selected quantity:   0
  1. Subtotal:  0.00
Art. No. Pack Qty. Pack. Price Quantity
K714.1 1 l plastic

€28.95

K714.2 5 l plastic

€89.80

K714.3 5 l ROTI®CUBE

€102.05

K714.4 10 l ROTI®CUBE

€174.70

In stock
Available
In procurement
No longer available
Delivery date currently unknown
Selected quantity:   0
  1. Subtotal:  0.00

Downloads / MSDS


General information

Volumetric Standard Solutions

A volumetric standard solution is a solution containing a precisely known concentration of a substance. The concentration of a volumetric standard solution is determined using a primary standard, which is accurately weighed and dissolved to make a specific volume. Volumetric standard solutions are made using reagent-grade (p.a.) substances as source materials.


Volumetric Standard Solutions, ready-to-use

The advantages of this over making them yourself are:

  • Manufactured and tested using modern manufacturing and analytical methods
  • Ready-to-use solutions
  • High accuracy for precise analyses
  • Application of NIST-certified reference substances for checking
  • Connection to standard titrators is possible


Determination of Water Hardness

Water contains a whole host of salts and other compounds in addition to the gases dissolved in it (oxygen, nitrogen, carbon dioxide). Its most important constituents are magnesium and calcium in the form of their chlorides, sulphates and bicarbonates. These dissolved salts are known as hardeners. The bicarbonates precipitate in the heat (during boiling) as carbonates and are known as carbonate hardness or temporary hardness. The sulphate and chloride compounds are known as permanent hardness or non-carbonate hardness. Total hardness describes the concentration of alkaline earth metal ions in water.

The unit of measurement for water hardness used to be 1 °dH (German degrees of hardness), which corresponds to 10,00 mg CaO or 7,19 mg MgO in one litre of water. Today we use millimoles per litre (mmol/l), whereby 1 °dH corresponds to 0,18 mmol/l of earth metal ions and 1 mmol/l corresponds to 5,6 °dH.


Certificates of Analysis

You can search for and download your certificate of analysis for the selected product here. Please provide your batch number.
The following analysis certificates have been found:

Type analysis

Amount-of-substance conc. (20 °C)0,1 mol/l ±0,2 %
Titer0,998-1,002