Jump to content Jump to navigation menu

Anthracene, 250 g

From  Carl ROTH
≥99,7 %, for scintillation
Examples of effect: Are harmful to aquatic organisms, toxic or highly toxic, acute or with long-term effects. Safety: To be disposed of as hazardous waste only, do not allow into the environment under any circumstances.
Danger
EUH440-H410
i accumulates in the environment and living organisms including in humans, very toxic to aquatic life with long lasting effects
P273 P391
i avoid release to the environment, collect spillage
Pack Qty.
Pack.
Paranaphthalene
Empirical formula C14H10
Molar mass (M) 178,23 g/mol
Density (D) 1,126 g/cm³
Boiling point (bp) 342 °C
Flash point (flp) 121 °C
Melting point (mp) 217 °C
ADR 9 III
WGK 2
CAS No. 120-12-7
EG-Nr. 204-371-1
UN-Nr. 3077


€659.00/Pack Qty. 

excl. VAT. | 250 g per Pack Qty.

Art. No. 21PH.3

In stock
24 hour direct shipment
Free of shipping costs from 250 €
from 6 Pack Qty. €626.05/Pack Qty.
from 24 Pack Qty. €593.10/Pack Qty.
Your personal advisor for this product
Dr. Andreas Ganzbuhl
Technical Support
Delivery times, available quantities, offers, samples, etc.

Our sales team
+49 721 5606 - 515

Anthracene
Selected quantity:   0
  1. Subtotal:  0.00
Art. No. Pack Qty. Pack. Price Quantity
21PH.1 50 g plastic

€195.00

21PH.2 100 g plastic

€329.00

21PH.3 250 g plastic

€659.00

In stock
Available (note delivery time)
In procurement
No longer available
Delivery date currently unknown
Selected quantity:   0
  1. Subtotal:  0.00

Downloads / MSDS


General information

Advantages of ROTISZINT® scinitillation cocktails

The composition of the ROTISZINT® cocktails is modern and does not contain NPE (nonylphenylethoxylates, subject to REACH). The cocktails thus comply with the Directive 2003/53/EC of the European Parliament and Council.
NPE has been replaced by a combination of several reagents specifically adapted to the respective use. The cocktails can thus be used in a targeted manner and give very high counting yields.

All new ROTISZINT® cocktails are biodegradable. Due to the low vapour pressure of the solvent, there is no odour nuisance, the solution is difficult to ignite and economical in consumption. ROTISZINT® shows excellent quench resistance, good sample stability, no chemiluminescence and no diffusion through plastic vials.

  • High counting efficiency
  • Low quenching
  • Flame retardant
  • NPE free
  • Biodegradable
  • Non carcinogenic
  • According to 2003/53/ECC


Application of modern ROTISZINT® scintillation cocktails

The ROTISZINT® scintillation cocktails of the next generation are modern, versatile, ready-to-use scintillation cocktails for liquid scintillation (LSC) of β-emitters (e.g. 3H, 14C, 32P , 35S). The ROTISZINT® scintillation cocktails are applicable for scintillation of aqueous samples in the entire biological, biochemical and chemical field.

Wide excitation range between 190 and 370 nm
emission maximum: 420-430 nm
The modern ROTISZINT® cocktails contain the same reagents as primary and secondary scintillators that were used in ROTISZINT®Eco plus. Thus, neither the excitation nor the detection wavelength change for the application.

We still recommend to use the same scintillation protocol in the first approaches with one of the new ROTISZINT® cocktails that was previously used with cocktail 0016. In many cases, the parameters are directly transferable. If the scintillation results are not satisfactory at first, the sample quantity (the ratio sample / cocktail) can be rebalanced.


Easy application by means of dispensers

ROTISZINT® Cocktails are supplied in black plastic bottles that can be used as stand-up containers. They allow safe and space-saving storage and use.
With a practical dispenser, you can conveniently and safely take out the amount of cocktail you need at any time. We recommend the use of ROTILABO®Dispensers (Art. No. HAC6.1-HAC9.1, HAE0.1 oder HAE1.1) and telescopic suction pipe (Art. No. AA92.1).
To withdraw the entire liquid, you can easily replace the inner withdrawal tube with a longer Teflon® or polyethylene tube (6 mm innerØ), or use the telescopic suction tube (order no. AA92.1).


Certificates of Analysis

You can search for and download your certificate of analysis for the selected product here. Please provide your batch number.
The following analysis certificates have been found:

Type analysis

Appearancewhite crystalline solid
Assay≥99.7 %
Melting point214-216 °C
Sulphated ash≤0.1 %
Water (KF)≤0.1 %