Magigoo Pro PA for polyamide (nylon) filaments, Glue Stick, 50 ml

Magigoo Pro PA - The 3D printing adhesive for polyamide (nylon), is designed for professional use to work with polyamide filaments. The part should be relatively easy to remove after cooling and the adhesive residue should also be easy to remove.

WHY:

PA (polyamide) describes a group of polymers with an amide repeating unit. In general, there are 3 main types of PA in the FDM industry, including PA12, PA66 and PA6.
Sometimes these materials can either be refined with other polymers or reinforced with glass or carbon fibres. In general, nylon fibres exhibit high strength, toughness, elasticity, wear resistance, chemical resistance and thermal resistance and are widely used in various industrial applications.
Nylon filaments prove to be challenging materials for FDM printing due to their lower density, adhesion to conventional 3D printing build surfaces and their higher tendency to warp. In addition, there are several classes of PA filaments, each of which behave differently.
Magigoo Pro PA is a specialised solution for FDM printing of PA filaments that has beendeveloped to work with a variety of PA types."