Naar de inhoud springen Naar het navigatiemenu springen

Diethyl ether, 1 l, glass

ROTIPURAN® ≥99,5 %, p.a., stabilised
Icon_EVE-EUD Please consider that this product might be liable to some legal sanctions as for example to obtain an end user declaration or the prohibition of some applications. For details please do contact your counterpart in our sales department!
Mogelijke gevolgen: zijn ontvlambaar; vloeistoffen vormen met lucht explosieve mengsels; zorgen met water voor ontvlambare gassen of zijn zelfontvlambaar. Veiligheid: uit de buurt van open vuur en warmtebronnen houden; vaten dicht afsluiten; brandveilig bewaren.
Mogelijke gevolgen: leiden tot schade aan de gezondheid, irriteren organen, huid of luchtwegen. Leiden in grotere hoeveelheden tot de dood. Veiligheid: zoals hierboven; bij huidirritaties of oogcontact met water of geschikt middel spoelen.
Danger
H224-H302-H336-EUH019-EUH066
i extremely flammable liquid and vapour, harmful if swallowed, may cause drowsiness or dizziness
P210 P243 P261 P303+P361+P353 P304+P340 P312
i keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking, take action to prevent static discharges, avoid breathing dust/fume/gas/mist/vapours/spray, IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower], IF INHALED: Remove person to fresh air and keep comfortable for breathing, call a POISON CENTRE/doctor if you feel unwell
Verwante producten
VE
Verp.
Ether, Sulphuric ether, Ethyl ether
Empirical formula C4H10O
Molar mass (M) 74,12 g/mol
Density (D) 0,71 g/cm³
Boiling point (bp) 34,59 °C
Flash point (flp) -40 °C
Melting point (mp) -116 °C
ADR 3 I
WGK 1
CAS No. 60-29-7
EG-Nr. 200-467-2
UN-Nr. 1155


61,85 €/VE 

Excl. btw | 1 l Per VE

Bestelnr. 3942.1

In productie
Vrij van verzendingskosten vanaf 250 €
Vanaf 6 VE 58,76 €/VE
Vanaf 24 VE 55,66 €/VE
Diethyl ether
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00
Bestelnr. VE Verp. Prijs Hoeveelheid
3942.1 1 l glass

61,85 €

3942.4 5 l aluminium

209,65 €

3942.5 25 l tinplate

628,90 €

3942.6 2,5 l glass

110,20 €

Op voorraad
Beschikbaar
In bestelling
Niet meer verkrijgbaar
Leveringsdatum onbekend
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00

Downloads / MSDS


Algemene informatie

Acid Value Determination

The acid number characterises the acidic components of the fats. For this purpose, the sample is dissolved in a solvent and titrated against phenolphthalein with potassium hydroxide solution. Only free fatty acids are recorded. The fatty acids bound in the glycerides are not determined.


Determination of Fat

Fat analysis is used to determine the fat content and fat composition of foodstuffs. Individual components or total fats levels can be calculated depending on the purpose of testing. Different components are subject to different procedures by law, such as the Gerber method or the Van Gulik technique.


Fat- and protein-containing samples should be cleared using Carrez reagents:

• Add sample to 60 ml water

• Subsequently add, while mixing after each step:

  a) 5 ml Carrez-I-solution, Art. No. 9944

  (or 7,2 g zinc sulphate heptahydrate, Art. No. K301 ad 100 ml)

  b) 5 ml Carrez-II-solution, Art. No. 9950

  (or 3,6 g potassium hexacyanoferrate(II), Art. No. P745 ad 100 ml)

• Adjust pH to 7,5 - 8,5 by adding NaOH (0,1 M) Art.No. K020

• Fill volumetric flask up to mark, mix, and filter


Analysecertificaten

Hier kunt u uw analysecertificaat voor het geselecteerde product zoeken en downloaden. Geef een chargenummer op.
De volgende analysecertificaten werden gevonden:

Guarantee analysis

Assay (GC)≥99,5 %
Density (20 °C)0,714-0,716
Water (KF)≤0,1 %
Säuren (CH3COOH)≤0,01 %
Peroxides (as H2O2)not detectable
Aluminium (Al)≤0,00005 %
Barium (Ba)≤0,00001 %
Lead (Pb)≤0,000001 %
Cadmium (Cd)≤0,000005 %
Calcium (Ca)≤0,00005 %
Chromium (Cr)≤0,000002 %
Cobalt (Co)≤0,000002 %
Iron (Fe)≤0,000001 %
Copper (Cu)≤0,000001 %
Manganese (Mn)≤0,000002 %
Nickel (Ni)≤0,00001 %
Zinc (Zn)≤0,000001 %
Tin (Sn)≤0,00001 %
Evaporation residue≤0,002 %
Stabilised with ca. 5 ppm BHT.