Naar de inhoud springen Naar het navigatiemenu springen

Tin(II) chloride dihydrate, 100 g

≥98 %, p.a., max. 0,05 ppm Hg
Mogelijke gevolgen: vernietigen metalen en zijn bijtend voor lichaamsweefsel; ernstig oogletsel is mogelijk. Veiligheid: contact vermijden; veiligheidsbril en handschoenen dragen. Bij contact ogen en huid met water spoelen.
Mogelijke gevolgen: leiden tot schade aan de gezondheid, irriteren organen, huid of luchtwegen. Leiden in grotere hoeveelheden tot de dood. Veiligheid: zoals hierboven; bij huidirritaties of oogcontact met water of geschikt middel spoelen.
Mogelijke gevolgen: veroorzaken allergieën, kankerverwekkend (carcinogeen), verandering erfelijk materiaal (mutageen), brengt de voortplanting in gevaar en vruchtbeschadigend (reprotoxisch) of orgaanbeschadigend Veiligheid: voor het werk met dergelijke stoffen moet men zich goed informeren; veiligheidskleding en handschoenen, oog- en mondbescherming of adembescherming dragen.
Danger
H290-H302+H332-H314-H317-H335-H373-H412
i may be corrosive to metals, harmful if swallowed or if inhaled, causes severe skin burns and eye damage, may cause an allergic skin reaction, may cause respiratory irritation, may cause damage to organs (cardiovascular system) through prolonged or repeated exposure (if swallowed), harmful to aquatic life with long lasting effects
P260 P280 P303+P361+P353 P304+P340 P305+P351+P338 P308+P311
i do not breathe dust, wear protective gloves/eye protection/face protection, IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower], IF INHALED: Remove person to fresh air and keep comfortable for breathing, IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing, IF exposed or concerned: Call a POISON CENTER/doctor
Verwante producten
VE
Verp.
Stannous chloride, Tin dichloride dihydrate
Empirical formula SnCl2 · 2 H2O
Molar mass (M) 225,63 g/mol
Density (D) 2,71 g/cm³
Boiling point (bp) 623 °C
Melting point (mp) 37 °C
ADR 8 II
WGK 3
CAS No. 10025-69-1
EG-Nr. 231-868-0
UN-Nr. 3260

For determination of mercury.

66,55 €/VE 

Excl. btw | 100 g Per VE

Bestelnr. KK07.1

Op voorraad
Vrij van verzendingskosten vanaf 250 €
Snelle en betrouwbare levering!
Vanaf 6 VE 63,22 €/VE
Vanaf 24 VE 59,90 €/VE
Tin(II) chloride dihydrate
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00
Bestelnr. VE Verp. Prijs Hoeveelheid
KK07.1 100 g glass

66,55 €

KK07.2 250 g glass

138,70 €

Op voorraad
Beschikbaar
In bestelling
Niet meer verkrijgbaar
Leveringsdatum onbekend
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00

Downloads / MSDS


Algemene informatie

Determination of mercury

Mercury has been used in technical applications since ancient times. Its high mobility means that it is particularly prevalent in the environment. Yet huge amounts of it are continuously being released into the atmosphere, for example through combustion reactions. Mercury forms organic compounds that are fat-soluble, which enables them to enter the food chain. The two most commonly used standard methods for analysing mercury are the AAS (atomic absorption spectroscopy) procedure and the ICP (inductively coupled plasma) technique. It goes without saying that the reagents used to prepare samples must not contain mercury. Carl ROTH offers these reagents with a mercury content of less than 0.05 ppm.


Salts for Analysis

Our salts for analysis are manufactured under strict production guidelines. Analytical purity and best quality reliably characterize each batch. Salts in p.a. quality made by Carl ROTH meet the high requirements for reproducible results. Most of our salts are additionally specified according to international standards like ACS and ISO.

Definition:
p.a.: pro analysi (for analysis)ACS: American Chemical SocietyISO: International Standard Organisation


Salts


Analysecertificaten

Hier kunt u uw analysecertificaat voor het geselecteerde product zoeken en downloaden. Geef een chargenummer op.
De volgende analysecertificaten werden gevonden:

Guarantee analysis

Assay (iodom.)98,0-103,0 %
Sulphate (SO4)≤0,002 %
Ammonium (NH4)≤0,002 %
Mercury (Hg)≤0,000005 %
Arsenic (As)≤0,0001 %
Lead (Pb)≤0,01 %
Calcium (Ca)≤0,005 %
Iron (Fe)≤0,003 %
Potassium (K)≤0,005 %
Sodium (Na)≤0,01 %