Naar de inhoud springen Naar het navigatiemenu springen

Scintillatieflesjes 20 ml Sluitdoppen van PP met PE-schuimafdichting, borosilicaatglas

Van  DWK Life Sciences
Icon_DURAN-GROUP_Logo
Materiaal: borosilicaatglas, Sluitdoppen van PP met afdichtingen van PE-schuim.
Inhoud
Materiaal


Van borosilicaatglas (conform USP type I en ASTM E 438 type I, klasse A), HDPE of PET. Sluitdoppen van PP met afdichtingen van PE-schuim of aluminiumgecoat celstofkarton, gemonteerd.
Productdetails

328,95 €/VE 

Excl. btw | 500 stuks Per VE

Bestelnr. EXY1.1

Op voorraad
Vrij van verzendingskosten vanaf 250 €
Snelle en betrouwbare levering!
Vanaf 6 VE 312,50 €/VE
Vanaf 24 VE 296,06 €/VE

Productdetails

Materiaal: borosilicaatglas, Sluitdoppen van PP met afdichtingen van PE-schuim.

Van borosilicaatglas (conform USP type I en ASTM E 438 type I, klasse A), HDPE of PET. Sluitdoppen van PP met afdichtingen van PE-schuim of aluminiumgecoat celstofkarton, gemonteerd.



Scintillatieflesjes 20 ml Sluitdoppen van PP met PE-schuimafdichting 

Geschikt voor waterachtige, zure, alkalische of alcoholische oplossingen.



Geen medisch hulpmiddel / Geen ivD-product
Technische informatie
Inhoud 20 ml
Materiaal borosilicaatglas 
Ø 28 mm
Hoogte 61 mm
Scintillatieflesjes 20 ml Sluitdoppen van PP met PE-schuimafdichting
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00
Bestelnr. Inhoud Materiaal VE Prijs Hoeveelheid
EXY1.1 20 ml borosilicaatglas 500 stuks

328,95 €

EXY2.1 20 ml HDPE 500 stuks

237,60 €

EXY3.1 20 ml PET 500 stuks

287,05 €

Op voorraad
Beschikbaar
In bestelling
Niet meer verkrijgbaar
Leveringsdatum onbekend
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00

Downloads / MSDS

Geen documenten beschikbaar

Algemene informatie

Advantages of ROTISZINT® scinitillation cocktails

The composition of the ROTISZINT® cocktails is modern and does not contain NPE (nonylphenylethoxylates, subject to REACH). The cocktails thus comply with the Directive 2003/53/EC of the European Parliament and Council.
NPE has been replaced by a combination of several reagents specifically adapted to the respective use. The cocktails can thus be used in a targeted manner and give very high counting yields.

All new ROTISZINT® cocktails are biodegradable. Due to the low vapour pressure of the solvent, there is no odour nuisance, the solution is difficult to ignite and economical in consumption. ROTISZINT® shows excellent quench resistance, good sample stability, no chemiluminescence and no diffusion through plastic vials.

  • High counting efficiency
  • Low quenching
  • Flame retardant
  • NPE free
  • Biodegradable
  • Non carcinogenic
  • According to 2003/53/ECC


Application of modern ROTISZINT® scintillation cocktails

The ROTISZINT® scintillation cocktails of the next generation are modern, versatile, ready-to-use scintillation cocktails for liquid scintillation (LSC) of β-emitters (e.g. 3H, 14C, 32P , 35S). The ROTISZINT® scintillation cocktails are applicable for scintillation of aqueous samples in the entire biological, biochemical and chemical field.

Wide excitation range between 190 and 370 nm
emission maximum: 420-430 nm
The modern ROTISZINT® cocktails contain the same reagents as primary and secondary scintillators that were used in ROTISZINT®Eco plus. Thus, neither the excitation nor the detection wavelength change for the application.

We still recommend to use the same scintillation protocol in the first approaches with one of the new ROTISZINT® cocktails that was previously used with cocktail 0016. In many cases, the parameters are directly transferable. If the scintillation results are not satisfactory at first, the sample quantity (the ratio sample / cocktail) can be rebalanced.


Easy application by means of dispensers

ROTISZINT® Cocktails are supplied in black plastic bottles that can be used as stand-up containers. They allow safe and space-saving storage and use.
With a practical dispenser, you can conveniently and safely take out the amount of cocktail you need at any time. We recommend the use of ROTILABO®Dispensers (Art. No. HAC6.1-HAC9.1, HAE0.1 oder HAE1.1) and telescopic suction pipe (Art. No. AA92.1).
To withdraw the entire liquid, you can easily replace the inner withdrawal tube with a longer Teflon® or polyethylene tube (6 mm innerØ), or use the telescopic suction tube (order no. AA92.1).