Naar de inhoud springen Naar het navigatiemenu springen

Scintillatieflesjes Inhoud 6,5 ml, HDPE, 2

Van  Simport
Materiaal: HDPE, Sluiting van PP.
Inhoud
Materiaal
Uitvoering


Universele flessen voor vloeibaar- en gammascintillatietellers of monsteropslag. Cilindrisch model maakt eenvoudig vullen en volledig leegmaken mogelijk. Uitloopbeveiliging.
Productdetails

127,95 €/VE 

Excl. btw | 1.000 stuks Per VE

Bestelnr. AYX4.1

Op voorraad
Vrij van verzendingskosten vanaf 250 €
Snelle en betrouwbare levering!
Vanaf 6 VE 121,55 €/VE
Vanaf 24 VE 115,16 €/VE

Productdetails

Materiaal: HDPE, Sluiting van PP.

Universele flessen voor vloeibaar- en gammascintillatietellers of monsteropslag. Cilindrisch model maakt eenvoudig vullen en volledig leegmaken mogelijk. Uitloopbeveiliging.



Scintillatieflesjes Inhoud 6,5 ml 

Flesjes type 2 van HDPE met dop van PP resp. flesjes type 3 van transparant PP met dop van HDPE. Openings- resp. binnen-Ø 12 mm. Speciale dop kan door eenvoudig opdrukken snel worden gesloten en met 1/4 slag weer worden geopend.



Geen medisch hulpmiddel / Geen ivD-product
Technische informatie
Uitvoering
Inhoud 6.5 ml
Materiaal HDPE 
Ø buiten 16 mm
Hoogte 57 mm
Scintillatieflesjes Inhoud 6,5 ml
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00
Bestelnr. Inhoud Materiaal Uitvoering VE Prijs Hoeveelheid
AYX4.1 6,5 ml HDPE 2 1000 stuks

127,95 €

AYX5.1 6,5 ml PP 3 1000 stuks

101,60 €

Op voorraad
Beschikbaar
In bestelling
Niet meer verkrijgbaar
Leveringsdatum onbekend
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00

Downloads / MSDS

Geen documenten beschikbaar

Algemene informatie

Advantages of ROTISZINT® scinitillation cocktails

The composition of the ROTISZINT® cocktails is modern and does not contain NPE (nonylphenylethoxylates, subject to REACH). The cocktails thus comply with the Directive 2003/53/EC of the European Parliament and Council.
NPE has been replaced by a combination of several reagents specifically adapted to the respective use. The cocktails can thus be used in a targeted manner and give very high counting yields.

All new ROTISZINT® cocktails are biodegradable. Due to the low vapour pressure of the solvent, there is no odour nuisance, the solution is difficult to ignite and economical in consumption. ROTISZINT® shows excellent quench resistance, good sample stability, no chemiluminescence and no diffusion through plastic vials.

  • High counting efficiency
  • Low quenching
  • Flame retardant
  • NPE free
  • Biodegradable
  • Non carcinogenic
  • According to 2003/53/ECC


Application of modern ROTISZINT® scintillation cocktails

The ROTISZINT® scintillation cocktails of the next generation are modern, versatile, ready-to-use scintillation cocktails for liquid scintillation (LSC) of β-emitters (e.g. 3H, 14C, 32P , 35S). The ROTISZINT® scintillation cocktails are applicable for scintillation of aqueous samples in the entire biological, biochemical and chemical field.

Wide excitation range between 190 and 370 nm
emission maximum: 420-430 nm
The modern ROTISZINT® cocktails contain the same reagents as primary and secondary scintillators that were used in ROTISZINT®Eco plus. Thus, neither the excitation nor the detection wavelength change for the application.

We still recommend to use the same scintillation protocol in the first approaches with one of the new ROTISZINT® cocktails that was previously used with cocktail 0016. In many cases, the parameters are directly transferable. If the scintillation results are not satisfactory at first, the sample quantity (the ratio sample / cocktail) can be rebalanced.


Easy application by means of dispensers

ROTISZINT® Cocktails are supplied in black plastic bottles that can be used as stand-up containers. They allow safe and space-saving storage and use.
With a practical dispenser, you can conveniently and safely take out the amount of cocktail you need at any time. We recommend the use of ROTILABO®Dispensers (Art. No. HAC6.1-HAC9.1, HAE0.1 oder HAE1.1) and telescopic suction pipe (Art. No. AA92.1).
To withdraw the entire liquid, you can easily replace the inner withdrawal tube with a longer Teflon® or polyethylene tube (6 mm innerØ), or use the telescopic suction tube (order no. AA92.1).