Naar de inhoud springen Naar het navigatiemenu springen

Teststrookjes Aquadur®

Van  ROTH SELECTION
Icon_Made-in-Germany Goods manufactured in Germany


Oriënterende sneltest voor de halfkwantitatieve bepaling van de waterhardheid (totale hardheid).Meetbereik van 0 °d tot boven 25 °d. Omrekening: 1 °d = 1,8 °f = 1,25 °e = 17,8 mg/l CaCO3.Een verpakking bevat 100 teststrookjes B 6 x L 95 mm.
Productdetails

29,35 €/VE 

Excl. btw | 100 stuks Per VE

Bestelnr. C725.1

Op voorraad
Vrij van verzendingskosten vanaf 250 €
Snelle en betrouwbare levering!
Vanaf 6 VE 27,88 €/VE
Vanaf 24 VE 26,42 €/VE

Productdetails


Oriënterende sneltest voor de halfkwantitatieve bepaling van de waterhardheid (totale hardheid).Meetbereik van 0 °d tot boven 25 °d. Omrekening: 1 °d = 1,8 °f = 1,25 °e = 17,8 mg/l CaCO3.Een verpakking bevat 100 teststrookjes B 6 x L 95 mm.


Toepassing:De teststrookjes worden kort in het te meten water gedompeld. Na ongeveer een minuut de opgetreden verkleuring vergelijken met een kleurschaal en het hardheidsbereik aflezen.Voorzichtig: het testpapier mag niet met de vingers worden aangeraakt.



Teststrookjes Aquadur® 

Technische informatie
Bewijs van Waterhardheid (totale hardheid) 
Indeling <3 °d, >5 °d, >10 °d, >15 °d, >20 °d, >25 °d µg/m³
Teststrookjes Aquadur®
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00
Bestelnr. VE Prijs Hoeveelheid
C725.1 100 stuks 

29,35 €

Op voorraad
In bestelling
Niet meer verkrijgbaar
Leveringsdatum onbekend
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00

Downloads / MSDS


Algemene informatie

Determination of Water Hardness

Water contains a whole host of salts and other compounds in addition to the gases dissolved in it (oxygen, nitrogen, carbon dioxide). Its most important constituents are magnesium and calcium in the form of their chlorides, sulphates and bicarbonates. These dissolved salts are known as hardeners. The bicarbonates precipitate in the heat (during boiling) as carbonates and are known as carbonate hardness or temporary hardness. The sulphate and chloride compounds are known as permanent hardness or non-carbonate hardness. Total hardness describes the concentration of alkaline earth metal ions in water.

The unit of measurement for water hardness used to be 1 °dH (German degrees of hardness), which corresponds to 10,00 mg CaO or 7,19 mg MgO in one litre of water. Today we use millimoles per litre (mmol/l), whereby 1 °dH corresponds to 0,18 mmol/l of earth metal ions and 1 mmol/l corresponds to 5,6 °dH.