Naar de inhoud springen Naar het navigatiemenu springen

2-Propanol, 2.5 l, plastic

ROTIPURAN® ≥99,8 %, p.a., ACS, ISO
Mogelijke gevolgen: zijn ontvlambaar; vloeistoffen vormen met lucht explosieve mengsels; zorgen met water voor ontvlambare gassen of zijn zelfontvlambaar. Veiligheid: uit de buurt van open vuur en warmtebronnen houden; vaten dicht afsluiten; brandveilig bewaren.
Mogelijke gevolgen: leiden tot schade aan de gezondheid, irriteren organen, huid of luchtwegen. Leiden in grotere hoeveelheden tot de dood. Veiligheid: zoals hierboven; bij huidirritaties of oogcontact met water of geschikt middel spoelen.
Danger
H225-H319-H336
i highly flammable liquid and vapour, causes serious eye irritation, may cause drowsiness or dizziness
P210 P233 P305+P351+P338
i keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking, keep container tightly closed, IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
Verwante producten
VE
Verp.
2-Hydroxypropane, Isopropyl alcohol, IPA, Isopropanol, Dimethyl carbinol
Empirical formula C3H8O
Molar mass (M) 60,10 g/mol
Density (D) 0,79 g/cm³
Boiling point (bp) 83 °C
Flash point (flp) 12 °C
Melting point (mp) -89 °C
ADR 3 II
WGK 1
CAS No. 67-63-0
EG-Nr. 200-661-7
UN-Nr. 1219


Isopropanol as Clearing Agent
Productdetails

94,50 €/VE 

Excl. btw | 2,5 l Per VE

Bestelnr. 6752.4

Op voorraad
Vrij van verzendingskosten vanaf 250 €
Snelle en betrouwbare levering!
Vanaf 4 VE 89,78 €/VE
Vanaf 24 VE 85,05 €/VE

Productdetails


Isopropanol as Clearing Agent

Isopropanol is well suited as clearing agent for paraffin-embedding, because it is compatible to melted paraffin: After dehydrating with isopropanol the sample is incubated in a mixture of isopropanol abs. and paraffin (1:1) at approx. 60 °C. After a further incubation step with pure paraffin, the sample is embedded as usual.
This method is particularly suitable to smooth organs. Since embedding can start immediately after alcohol step, the working process is shortened significantly.



2-Propanol ROTIPURAN® ≥99,8 %, p.a., ACS, ISO

2-Propanol
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00
Bestelnr. VE Verp. Prijs Hoeveelheid
6752.1 1 l glass

40,75 €

6752.2 2,5 l glass

96,65 €

6752.3 1 l plastic

38,60 €

6752.4 2,5 l plastic

94,50 €

6752.5 5 l plastic

155,90 €

6752.6 25 l tinplate

504,20 €

6752.7 10 l PE/steel

274,15 €

6752.8 10 l plastic

263,40 €

6752.9 25 l plastic

489,15 €

Op voorraad
Beschikbaar
In bestelling
Niet meer verkrijgbaar
Leveringsdatum onbekend
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00

Downloads / MSDS


Algemene informatie

Acid Value Determination

The acid number characterises the acidic components of the fats. For this purpose, the sample is dissolved in a solvent and titrated against phenolphthalein with potassium hydroxide solution. Only free fatty acids are recorded. The fatty acids bound in the glycerides are not determined.


ROTI®Calipure standards for your calibration needs

Carl ROTH offers an extensive range of calibration and control standards. These products are manufactured from highly pure starting material and are specially tested for each application. The corresponding batch-specific certificate of analysis is available online. Each product series offers excellent value for money.


Analysecertificaten

Hier kunt u uw analysecertificaat voor het geselecteerde product zoeken en downloaden. Geef een chargenummer op.
De volgende analysecertificaten werden gevonden:

Guarantee analysis

Assay (GC)≥99.8 %
Colour (Hazen)≤10
Acidity≤0.0001 meq/g
Solubility in H2Ocomplies
Density (d 20 °C/4 °C)0.784-0.787
Water≤0.05 %
Acetone (GC)≤0.01 %
Ethanol (GC)≤0.01 %
Methanol (GC)≤0.01 %
Evaporation residue≤0.001 %
Carbonylic compounds (as CO)≤0.002 %
Matter discoloured by H2SO4 (Hazen)≤10
Aluminium (Al)≤0.00005 %
Barium (Ba)≤0.00001 %
Lead (Pb)≤0.00001 %
Boron (B)≤0.000002 %
Cadmium (Cd)≤0.000005 %
Calcium (Ca)≤0.00005 %
Chromium (Cr)≤0.000002 %
Iron (Fe)≤0.00001 %
Cobalt (Co)≤0.000002 %
Copper (Cu)≤0.000002 %
Magnesium (Mg)≤0.00001 %
Manganese (Mn)≤0.000002 %
Nickel (Ni)≤0.000002 %
Zinc (Zn)≤0.00001 %
Tin (Sn)≤0.00001 %