Naar de inhoud springen Naar het navigatiemenu springen

Sodium polytungstate hydrate, 250 g

≥99,9 %
Mogelijke gevolgen: vernietigen metalen en zijn bijtend voor lichaamsweefsel; ernstig oogletsel is mogelijk. Veiligheid: contact vermijden; veiligheidsbril en handschoenen dragen. Bij contact ogen en huid met water spoelen.
Mogelijke gevolgen: leiden tot schade aan de gezondheid, irriteren organen, huid of luchtwegen. Leiden in grotere hoeveelheden tot de dood. Veiligheid: zoals hierboven; bij huidirritaties of oogcontact met water of geschikt middel spoelen.
Danger
H302-H318-H412
i harmful if swallowed, causes serious eye damage, harmful to aquatic life with long lasting effects
P273 P280 P305+P351+P338 P310
i avoid release to the environment, wear protective gloves/eye protection, IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing, immediately call a POISON CENTER/doctor
VE
Verp.
Sodium metatungstate
Empirical formula 3 Na2WO4 · 9 WO3 · H2O
Molar mass (M) 2986,01 g/mol
Density (D) 5,47 g/cm³
WGK 2
CAS No. 12141-67-2
EG-Nr. 412-770-9

For the preparation of heavy liquid. Reagent for density gradient centrifugation.

Sodium polytungstate (SPT) is perfect for preparation of heavy liquids. Carl ROTH offers an environmentally friendly alternative to using zinc chloride and mercury saline solutions or highly toxic halogenated hydrocarbons to conduct the sink or swim analyses required for density determination.
Productdetails

220,40 €/VE 

Excl. btw | 250 g Per VE

Bestelnr. 8828.2

Op voorraad
Vrij van verzendingskosten vanaf 250 €
Snelle en betrouwbare levering!
Vanaf 6 VE 209,38 €/VE
Vanaf 24 VE 198,36 €/VE

Productdetails


Sodium polytungstate (SPT) is perfect for preparation of heavy liquids. Carl ROTH offers an environmentally friendly alternative to using zinc chloride and mercury saline solutions or highly toxic halogenated hydrocarbons to conduct the sink or swim analyses required for density determination.

Eigenschappen:
  • Highly water soluble
  • pH-neutral solution
  • Maximum achievable density of the solution is 3,1 g/cm³ at 25 °C

Voordelen:
  • Non-toxic
  • Non-flammable
  • Odourless
  • Low viscosity
  • Easy to use
  • Extremely easy to clean the sinks and floats with water
  • Environmentally friendly

Mass of SPT used [g] Mass of H2O [g] End volume of solution [ml] Concentration c in [wt.-%] Density p [g/cm3] Viscosity η [mPa•s]
5,00 48,80 50 9,3 1,08 0,99
10,00 47,66 50 17,3 1,15 1,05
15,08 46,63 50 24,4 1,23 1,13
20,00 45,87 50 30,4 1,32 1,19
25,02 44,98 50 35,7 1,40 1,29
35,01 42,94 50 44,9 1,56 1,51
45,15 41,10 50 52,3 1,73 1,83
55,01 38,93 50 58,6 1,88 2,27
65,17 36,99 50 63,8 2,04 2,90
75,00 34,68 50 68,4 2,19 3,93
85,00 32,54 50 72,3 2,35 5,15
95,00 30,10 50 75,9 2,50 8,19
105,01 28,42 50 78,7 2,67 12,18
115,01 25,92 50 81,6 2,82 20,55
125,12 23,72 50 84,1 2,98 36,65
133,00 22,00 50 85,8 3,10 59,52


Sodium polytungstate hydrate ≥99,9 %

Sodium polytungstate hydrate
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00
Bestelnr. VE Verp. Prijs Hoeveelheid
8828.1 50 g plastic

60,75 €

8828.2 250 g plastic

220,40 €

8828.3 1 kg plastic

762,20 €

Op voorraad
Beschikbaar
In bestelling
Niet meer verkrijgbaar
Leveringsdatum onbekend
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00

Downloads / MSDS


Algemene informatie

Density determination

Sodium polytungstate (SPT) is perfect for preparation of heavy liquids. Carl ROTH offers an environmentally friendly alternative to using zinc chloride and mercury saline solutions or highly toxic halogenated hydrocarbons to conduct the sink or swim analyses required for density determination.

Eigenschappen:

  • Highly water soluble
  • pH-neutral solution adjustable
  • Maximum achievable density of the solution is 3.1 g/cm³ at 25 °C
Voordelen:
  • Non-toxic
  • Non-flammable
  • Odourless
  • Low viscosity
  • Easy to use
  • Extremely easy cleaning of the sinking and floating material with water
  • Environmentally friendly
Manufacture of aqueous sodium polytungstate solutions with the following densities and consequent viscosities at 25 °C


Mass of SPT used [g] Mass of H2O [g] End volume of solution [ml] Concentration c in [wt.-%] Density p [g/cm3] Viscosity η [mPa•s]
5,00 48,80 50 9,3 1,08 0,99
10,00 47,66 50 17,3 1,15 1,05
15,08 46,63 50 24,4 1,23 1,13
20,00 45,87 50 30,4 1,32 1,19
25,02 44,98 50 35,7 1,40 1,29
35,01 42,94 50 44,9 1,56 1,51
45,15 41,10 50 52,3 1,73 1,83
55,01 38,93 50 58,6 1,88 2,27
65,17 36,99 50 63,8 2,04 2,90
75,00 34,68 50 68,4 2,19 3,93
85,00 32,54 50 72,3 2,35 5,15
95,00 30,10 50 75,9 2,50 8,19
105,01 28,42 50 78,7 2,67 12,18
115,01 25,92 50 81,6 2,82 20,55
125,12 23,72 50 84,1 2,98 36,65
133,00 22,00 50 85,8 3,10 59,52

Analysecertificaten

Hier kunt u uw analysecertificaat voor het geselecteerde product zoeken en downloaden. Geef een chargenummer op.
De volgende analysecertificaten werden gevonden:

Type analysis

Assay≥99,9 %
Assay (WO3)≥85 %
Tubidity (density 2,80 g/ml)<10 NTU
Max. attainable density (25 °C)<3,1 g/ml