Naar de inhoud springen Naar het navigatiemenu springen

Zinc iodide, 100 g

≥98 %, powdered
Mogelijke gevolgen: leiden tot schade aan de gezondheid, irriteren organen, huid of luchtwegen. Leiden in grotere hoeveelheden tot de dood. Veiligheid: zoals hierboven; bij huidirritaties of oogcontact met water of geschikt middel spoelen.
Mogelijke gevolgen: zijn voor waterorganismen schadelijk, giftig of zeer giftig, acuut of met langdurige werking. Veiligheid: alleen met gevaarlijk afval afvoeren, in geen geval in het milieu laten terechtkomen.
Warning
H315-H319-H335-H410
i causes skin irritation, causes serious eye irritation, may cause respiratory irritation, very toxic to aquatic life with long lasting effects
P273 P280 P302+P352 P305+P351+P338
i avoid release to the environment, wear protective gloves/eye protection, IF ON SKIN: Wash with plenty of water, IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
VE
Verp.
Empirical formula ZnI2
Molar mass (M) 319,18 g/mol
Density (D) 4,74 g/cm³
Boiling point (bp) 625 °C
Melting point (mp) 446 °C
ADR 9 III
WGK 2
CAS No. 10139-47-6
EG-Nr. 233-396-0
UN-Nr. 3077


87,00 €/VE 

Excl. btw | 100 g Per VE

Bestelnr. 2730.2

Op voorraad
Vrij van verzendingskosten vanaf 250 €
Snelle en betrouwbare levering!
Vanaf 6 VE 82,65 €/VE
Vanaf 24 VE 78,30 €/VE
Zinc iodide
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00
Bestelnr. VE Verp. Prijs Hoeveelheid
2730.1 25 g glass

35,40 €

2730.2 100 g glass

87,00 €

2730.3 250 g glass

177,40 €

Op voorraad
Beschikbaar
In bestelling
Niet meer verkrijgbaar
Leveringsdatum onbekend
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00

Downloads / MSDS


Algemene informatie

Determination of biological oxygen demand (BOD)

BOD (biochemical oxygen demand) is a measure of the amount of oxygen that microorganisms need to break down the organic material in a water sample over a specific period of time. It is important to calculate the oxygen concentration at the start and end of the measuring time, which is usually five days and is expressed as an index (BOD5). Chemical, electrochemical or physical methods are used for this calculation.


Analysecertificaten

Hier kunt u uw analysecertificaat voor het geselecteerde product zoeken en downloaden. Geef een chargenummer op.
De volgende analysecertificaten werden gevonden:

Type analysis

Appearancewhite powder
Assay≥98,0 %
Lead (Pb)≤0,01 %
Iron (Fe)≤0,01 %
Copper (Cu)≤0,01 %
Sodium (Na)≤0,05 %