Naar de inhoud springen Naar het navigatiemenu springen

ROTI®Load 1, 10 ml, 1 x 10 ml

4x conc., reducing
Icon_ready-to-use Ready-to-use products and reagents
Icon_EVE-EUD Please consider that this product might be liable to some legal sanctions as for example to obtain an end user declaration or the prohibition of some applications. For details please do contact your counterpart in our sales department!
Mogelijke gevolgen: vernietigen metalen en zijn bijtend voor lichaamsweefsel; ernstig oogletsel is mogelijk. Veiligheid: contact vermijden; veiligheidsbril en handschoenen dragen. Bij contact ogen en huid met water spoelen.
Mogelijke gevolgen: leiden in kleinere hoeveelheden onmiddellijk tot ernstige schade aan de gezondheid of tot de dood. Veiligheid: niet inademen, aanraken, inslikken. Beschermingsmiddelen dragen. Onmiddellijk antigifcentrum of arts op de hoogte brengen. Stabiele zijpositie.
Mogelijke gevolgen: veroorzaken allergieën, kankerverwekkend (carcinogeen), verandering erfelijk materiaal (mutageen), brengt de voortplanting in gevaar en vruchtbeschadigend (reprotoxisch) of orgaanbeschadigend Veiligheid: voor het werk met dergelijke stoffen moet men zich goed informeren; veiligheidskleding en handschoenen, oog- en mondbescherming of adembescherming dragen.
Mogelijke gevolgen: zijn voor waterorganismen schadelijk, giftig of zeer giftig, acuut of met langdurige werking. Veiligheid: alleen met gevaarlijk afval afvoeren, in geen geval in het milieu laten terechtkomen.
Danger
H302+H332-H311-H315-H317-H318-H373-H411
i harmful if swallowed or if inhaled, toxic in contact with skin, causes skin irritation, may cause an allergic skin reaction, causes serious eye damage, may cause damage to organs (liver, heart) through prolonged or repeated exposure (if swallowed), toxic to aquatic life with long lasting effects
P273 P280 P302+P352 P305+P351+P338 P310
i avoid release to the environment, wear protective gloves/eye protection, IF ON SKIN: Wash with plenty of water, IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing, immediately call a POISON CENTER/doctor
VE
Verp.
Verpakking
Gel loading buffer, Laemmli buffer
Density (D) 1,2 g/cm³
Storage temp. +15 to +25 °C
ADR 6.1 III
WGK 3
UN-Nr. 2810

Protein gel loading buffer, modified formulation acc. to Laemmli.
Contains SDS (approx. 8 % w/v), β-mercapto ethanol (approx. 20 % v/v), glycerol (approx. 40 % v/v) and bromophenol blue (approx. 0,015 % w/v). Phosphate buffered.

ROTI®Load 1 (reducing) as well as ROTI®Load 2 and 3 (non-reducing) represent special gel loading buffers for protein gel electrophoresis. They have been designed to protect your proteins during sample preparation and to stabilise sensitive peptide bonds. Protein degradation is efficiently prevented by those buffer systems. ROTI®Load are 4x concentrated ready-to-use solutions, which may be used directly for sample loading.
Productdetails

22,50 €/VE 

Excl. btw | 10 ml Per VE

Bestelnr. K929.1

Op voorraad
Vrij van verzendingskosten vanaf 250 €
Snelle en betrouwbare levering!
Vanaf 6 VE 21,38 €/VE
Vanaf 24 VE 20,25 €/VE

Productdetails


ROTI®Load 1 (reducing) as well as ROTI®Load 2 and 3 (non-reducing) represent special gel loading buffers for protein gel electrophoresis. They have been designed to protect your proteins during sample preparation and to stabilise sensitive peptide bonds. Protein degradation is efficiently prevented by those buffer systems. ROTI®Load are 4x concentrated ready-to-use solutions, which may be used directly for sample loading.



ROTI®Load 1 4x conc., reducing

Well tested and proven sample buffer for protein gel electrophoresis that has been modified and further developed based on the original formulation acc. to Laemmli (Nature 227, 1970). Optimized for a distinct band display. Recommended for size estimation of proteins in gel.

  • Formulation acc. to Laemmli (modified)
  • Stabilises peptide bands
  • Prevents protein degradation
  • Improves gel separation

Gebruiksinstructies

ROTI®Load protein gel loading buffers are usually used as 1x concentrated solution. ROTI®Load can either be added to the prepared sample or the precipitated proteins are dissolved directly into ROTI®Load. Heat the ROTI®Load mixed sample to 95 °C for 5 minutes to break hydrogen bonds and stretch the peptide chains. The β-Mercaptoethanol contained in ROTI®Load 1 opens disulfide bridges by reduction and leads to a complete molecular stretching, the basic requirement for a correct size estimation of proteins in the gel.


ROTI®Load 1 prevents degradation of proteins while heating during sample preparation, additionally keeping the sample pH value constant during gel electrophoresis. Being a phosphate-buffered ready-to-use solution, ROTI®Load 1 already contains all necessary denaturing and reducing reagents, bromophenol blue as dye and glycerol as density increasing reagent.



ROTI®Load 1
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00
Bestelnr. VE Verp. Verpakking Prijs Hoeveelheid
K929.1 10 ml glass 1 x 10 ml

22,50 €

K929.2 40 ml glass 4 x 10 ml

67,65 €

K929.3 100 ml glass 10 x 10 ml

153,20 €

Op voorraad
Beschikbaar
In bestelling
Niet meer verkrijgbaar
Leveringsdatum onbekend
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00

Downloads / MSDS


Algemene informatie

Selecting a Suitable ROTI®Load Gel Loading Buffer for Proteins

ROTI®Load 1 is suitable for all PAGE standard gels. It has denaturing and reducing properties.
ROTI®Load 2 is suitable for protein complexes, secondary structures and native gels. It has denaturing properties, but it does not have reducing properties. It is possible to enrich the buffer solution with reducing agents such as β-Mercaptoethanol or DTT.
ROTI®Load 3 is suitable for native gels, precast gels and cooled gels. The buffer solution contains LDS. Unlike SDS, LDS does not crystallise out at low temperatures. In addition, the buffer solution is optimally adapted for precast gels. ROTI®Load 3 has denaturing properties, but does not have reducing properties. It is possible to enrich the buffer solution with reducing agents such as ß-Mercaptoethanol or DTT.

Glycerine is the standard reagent for increasing the density of samples.
SDS (sodium dodecyl sulphate), LDS (lithium dodecyl sulphate) are anionic surfactants. They form a negatively charged mantle around the protein molecules, which results in a denaturing effect. This process is reversible. Irreversible denaturation only occurs if the samples are boiled. Negative charging allows the molecules to be separated during electrophoresis.
β-mercaptoethanol, DTT (dithiothreitol) are reducing agents which split disulphide bridges in protein molecules. Increased unfolding of the molecule occurs. This process is reversible.


Analysecertificaten

Hier kunt u uw analysecertificaat voor het geselecteerde product zoeken en downloaden. Geef een chargenummer op.
De volgende analysecertificaten werden gevonden:

Type analysis

Appearancedark blue, clear solution
pH value (1x sol.)6.6-7.2
Remark: Contains SDS. Can be redissolved by heating (max. 45 °C).