Naar de inhoud springen Naar het navigatiemenu springen

Trichloromethane/Chloroform

ROTISOLV® Pestilyse® plus ≥99,9 %, stabilised with amylene
Icon_EVE-EUD Please consider that this product might be liable to some legal sanctions as for example to obtain an end user declaration or the prohibition of some applications. For details please do contact your counterpart in our sales department!
Mogelijke gevolgen: leiden in kleinere hoeveelheden onmiddellijk tot ernstige schade aan de gezondheid of tot de dood. Veiligheid: niet inademen, aanraken, inslikken. Beschermingsmiddelen dragen. Onmiddellijk antigifcentrum of arts op de hoogte brengen. Stabiele zijpositie.
Mogelijke gevolgen: veroorzaken allergieën, kankerverwekkend (carcinogeen), verandering erfelijk materiaal (mutageen), brengt de voortplanting in gevaar en vruchtbeschadigend (reprotoxisch) of orgaanbeschadigend Veiligheid: voor het werk met dergelijke stoffen moet men zich goed informeren; veiligheidskleding en handschoenen, oog- en mondbescherming of adembescherming dragen.
Danger
H302-H315-H319-H331-H351-H361d-H372
i harmful if swallowed, causes skin irritation, causes serious eye irritation, toxic if inhaled, suspected of causing cancer, suspected of damaging the unborn child, causes damage to organs (liver, kidney) through prolonged or repeated exposure
P202 P260 P302+P352 P304+P340 P305+P351+P338 P308+P313
i do not handle until all safety precautions have been read and understood, do not breathe mist/vapours/spray, IF ON SKIN: Wash with plenty of water, IF INHALED: Remove person to fresh air and keep comfortable for breathing, IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing, IF exposed or concerned: Get medical advice/attention
Verwante producten
VE
Verp.
Chloroform
Empirical formula CHCl3
Molar mass (M) 119,38 g/mol
Density (D) 1,48 g/cm³
Boiling point (bp) 61 °C
Melting point (mp) -63 °C
ADR 6.1 III
WGK 3
CAS No. 67-66-3
EG-Nr. 200-663-8
UN-Nr. 1888

For determination of dioxins, furans, PCBs, pesticides, hydrocarbons etc.

107,00 €/VE 

Excl. btw | 2,5 l Per VE

Bestelnr. 7554.1

Op voorraad
Vrij van verzendingskosten vanaf 250 €
Snelle en betrouwbare levering!
Vanaf 4 VE 101,65 €/VE
Vanaf 24 VE 96,30 €/VE

Productdetails



Trichloromethane/Chloroform ROTISOLV® Pestilyse® plus ≥99,9 %, stabilised with amylene

Technische informatie
Watermengbaarheid no 
Trichloromethane/Chloroform
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00
Bestelnr. VE Verp. Prijs Hoeveelheid
7554.1 2,5 l glass

107,00 €

Op voorraad
Beschikbaar
In bestelling
Niet meer verkrijgbaar
Leveringsdatum onbekend
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00

Downloads / MSDS


Algemene informatie

U vindt nog meer aantrekkelijke aanbiedingen om uw chromatografielaboratorium te vervolledigen op onze Chromatografie pagina!


ROTISOLV® Pestilyse® plus Solvents

for determination of dioxines, furanes, PCBs, pesticides, hydrocarbons and further pollutants

Carl ROTH created this product line (ROTISOLV® Pestilyse® plus) especially to address the growing requirements in residue analysis. Several relevant parameters are specified for these solvents which allow the use in various applications. With this product line, Carl ROTH sets the benchmark for residue analysis solvents in terms of purity and quality.



Eigenschappen:

  • Highest purity
  • Controlled by FID, ECD and NP
  • PAH tested
  • Tested for hydrocarbons C14-C40
  • Tested for fluorescence
  • Volatile impurities: max. 5 ppm
  • Non-volatile impurities: max. 5 ppm


Analysecertificaten

Hier kunt u uw analysecertificaat voor het geselecteerde product zoeken en downloaden. Geef een chargenummer op.
De volgende analysecertificaten werden gevonden:

Guarantee analysis

Assay (GC)≥99,9 %
Colour (APHA)≤10
Water (KF)≤0,01 %
Free acid (as HCl)≤0,0005 %
Evaporation residue≤0,0003 %
GC/ECD suitability (as heptachloro epoxide)≤10 ng/l
GC/ECD dioxins, furans and PCBs (as lindane)≤5 ng/l
GC/ECD pesticides (as lindane)≤5 ng/l
GC/NPD pesticides (as parathion)≤10 ng/l
Oil index (any hydrocarbon C10-C40)≤0,1 mg/l
PAH-test (less than 2 ppb, HPLC)complies
Fluorescence (as quinine)
254 nm≤1 ppb
365 nm≤1 ppb
Stabilised with 30-60 ppm amylene.