Technical Data Sheet
CO2 incubator BB 15
From Thermo
Vol.
Operating temperature
Type
With air jacket heating for constant temperature as well as a second control circuit that assumes control of the set temperature in the case of a fault. The chamber floor is used as water reservoir (an electric suction pump is included in the scope of delivery for changing the water). The large water surface and direct heat transfer from the heated base achieve a faster humidity recovery time.
€7,360.00/Pack Qty.
excl. VAT. | 1 unit(s) per Pack Qty.
Art. No. ETT4.1
Available (note delivery time)
Ready for dispatch in 2-3 weeks
Free of shipping costs from 250 €
from 6 Pack Qty.
€6,992.00/Pack Qty.
from 24 Pack Qty.
€6,624.00/Pack Qty.
Add to shopping basket
Product details
With air jacket heating for constant temperature as well as a second control circuit that assumes control of the set temperature in the case of a fault. The chamber floor is used as water reservoir (an electric suction pump is included in the scope of delivery for changing the water). The large water surface and direct heat transfer from the heated base achieve a faster humidity recovery time.
- Operating temperature range from 3 °C above room temperature to 55 °C (in 0.1-°C-increments) and CO2-concentrations up to 20% (in 0.1%-increments)
- Digital display for °C and CO2 content
- Tube penetration 42 mm in the rear wall allows operation of additional devices
- Stainless steel interior
- Constant moisture at 37 °C approx. 95% RH
- Additional inside door made of glass, heated outside door
- To supply the incubator with CO2, a separate gas cylinder or a central compressed-gas tank is required
- Conditioned water (demineralised/distilled and autoclaved or fully desalinated/distilled and autoclaved) is required for humidification
CO2 incubator BB 15
Delivery incl. three perforated sheet inserts (W 423 x D 455 mm), hose set (ID 4 mm, OD 10 mm, approx. L 3 m), CO2 filter and electric immersion pump. Please note: additional transport costs apply for delivery to the place of use. We will be happy to inform you of these on request.
Technical Information
| Type | BB 15 |
| Vol. | 151 l |
| Operating temperature | from +3 °C above room temperature to +55 °C |
| Inner width | 470 mm |
| Inner depth | 530 mm |
| Inner height | 607 mm |
| Outer width | 637 mm |
| Outer depth | 766 mm |
| Outer height | 867 mm |
| Required input pressure | 0.8-1.0 bar, 99.5 % by volume medical CO2 quality |
| Intake-air filtration | CO2 filter, PTFE filter 0.3 μm, PP filter housing |
| Max. removable shelves | 10 |
| Temporal temp. variance | ±0,1 K |
| Spatial temp. deviation | ±0,5 K |
| CO2 constancy | ±0,3 % |
| Weight | 70 kg |
| Mains connection | 230 V, 50/60 Hz |
Add to shopping basket
CO2 incubator BB 15
Selected quantity:
0
- Subtotal: 0.00
Add to shopping basket
| Art. No. | Vol. | Operating temperature | Type | Pack Qty. | Price | Quantity | |
|---|---|---|---|---|---|---|---|
| ETT4.1 | 151 l | from +3 °C above room temperature to +55 °C | BB 15 | 1 unit(s) |
€7,360.00 |
|
|
|
In stock
Available (note delivery time)
In procurement
No longer available
Delivery date currently unknown
|
|||||||
Selected quantity:
0
- Subtotal: 0.00
Add to shopping basket