Magigoo Pro PP-GF for glass-reinforced polypropylene (GFPP) filaments

Magigoo PP-GF 3D glue stick has been specially developed for processing glass-reinforced polypropylene (GFPP) filaments and ensures that the prints adhere firmly when the print bed is hot and that the part is easy to remove after cooling.

WHY:

Polypropylene (PP) is a thermoplastic semi-crystalline polymer with properties such as good strength, impact resistance and ductility, which makes it suitable for use as a construction material. However, PP is a soft material and, like most plastics, can be reinforced by the introduction of fibres to form a polymer composite. These materials are usually stiffer and stronger than the base polymer and can result in a material with a very high strength to weight ratio. Compared to most pure PP filaments, the GF30PP deforms more. This type of material requires a completely new adhesive formulation to develop its distinctive properties.



HOW:

Magigoo PP-GF has been developed and tested to work with 30% glass fibre filled polypropylene.

For demanding prints, a 20 mm brim with 2 layers is recommended. Clean the build plate and align it well before printing.
A closed printer is recommended.
Print speed 20-55mm.