product.details.print
Xylene (isomers), 5 l, aluminium
Molar mass (M) 106,17 g/mol
Density (D) 0,87 g/cm³
Boiling point (bp) 139,1 °C
Flash point (flp) 27 °C
Melting point (mp) -47,8 °C
ADR 3 III
WGK 2
CAS No. 1330-20-7
EG-Nr. 215-535-7
UN-Nr. 1307
203,20 €/VE
Excl. btw | 5 l Per VE
Bestelnr. 4436.3
- Tussentotaal: 0.00
| Bestelnr. | VE | Verp. | Prijs | Hoeveelheid | |
|---|---|---|---|---|---|
| 4436.1 | 1 l | glass |
56,90 € |
|
|
| 4436.2 | 2,5 l | glass |
126,35 € |
|
|
| 4436.3 | 5 l | aluminium |
203,20 € |
|
|
| 4436.4 | 10 l | tinplate |
274,15 € |
|
|
| 4436.7 | 25 l | tinplate |
568,70 € |
|
|
| 4436.20 | 200 l | tinplate |
1.988,75 € |
|
|
|
Op voorraad
Beschikbaar (let op levertijd)
In bestelling
Niet meer verkrijgbaar
Leveringsdatum onbekend
|
|||||
- Tussentotaal: 0.00
Downloads / MSDS
Algemene informatie
Highest purity and extensive trace analysis for excellent results!
We offer:ROTIPURAN® p.a. solvents with superior analytical reliability in terms of quality and batch consistency. The so branded solvents arebeing constantly controlled, guaranteed, and safeguarded through careful preparation, testing and packaging. In addition, many of these solvents meet the requirements of ACS (American Chemical Society) and ISO (International Organization for Standardization), and thusare fully specified.
Applications:ROTIPURAN® p.a. solvents are suitable for all standard applications in biological and chemical laboratory or pilot plant, such as:extractions, qualitative and quantitative analysis. As a matter of course, the p.a. solvents offered here may well be used for otherapplications instead.
Carl ROTH offers an extensive range of calibration and control standards. These products are manufactured from highly pure starting material and are specially tested for each application. The corresponding batch-specific certificate of analysis is available online. Each product series offers excellent value for money.
Analysecertificaten
Guarantee analysis
| Total content of C8H10-isomeres (GC) | ≥99.0 % |
| Colour (Hazen) | ≤10 |
| Water | ≤0,03 % |
| Acidity | ≤0,00025 meq/g |
| Alkalinity | ≤0,00025 meq/g |
| Density (d 20 °C/4 °C) | 0,862-0,870 |
| Evaporation residue | ≤0.002 % |
| Benzene (GC) | ≤0,1 % |
| Toluene (GC) | ≤0,1 % |
| Ethylbenzene (GC) | ≤25 % |
| Aluminium (Al) | ≤0,00005 % |
| Barium (Ba) | ≤0,00001 % |
| Lead (Pb) | ≤0,00001 % |
| Boron (B) | ≤0,000002 % |
| Cadmium (Cd) | ≤0,000005 % |
| Calcium (Ca) | ≤0,00005 % |
| Chromium (Cr) | ≤0,000002 % |
| Iron (Fe) | ≤0,00001 % |
| Cobalt (Co) | ≤0,000002 % |
| Copper (Cu) | ≤0,000002 % |
| Magnesium (Mg) | ≤0,00001 % |
| Manganese (Mn) | ≤0,000002 % |
| Nickel (Ni) | ≤0,000002 % |
| Tin (Sn) | ≤0,00001 % |
| Zinc (Zn) | ≤0,00001 % |
| Thiophene | complies |
| Sulphur compounds (as S) | ≤0,003 % |
| Matter discoloured by H2SO4 (Hazen) | complies |