Technical Data Sheet
Magigoo Pro Metal for metal filaments e.g. Ultrafuse® 316L
Bitte beachten: Abweichende Konditionen / Please note: Different conditions
Boiling point (bp) 100 °C
WGK 1
€41.90/Pack Qty.
excl. VAT. | 50 ml per Pack Qty.
Art. No. 27H9.1
Product details
Magigoo Pro Metal for metal filaments e.g. Ultrafuse® 316L
Magigoo Pro Metal was developed as a professional first coat adhesive for BASF Ultrafuse® 316L. Magigoo Metal is non-hazardous, non-flammable and also approved for use in the post-processing of BASF Ultrafuse® 316L. Magigoo Metal also allows easy removal of the green parts from the build plate.
WHY:
BASF Ultrafuse 316L enables the production of solid 316L stainless steel parts through the use of desktop FDM 3D printers and a sintering process. Ultrafuse® 316L filament consists of highly refined metal particles embedded in thermoplastic binders. As a filament, the metal-polymer composite therefore poses none of the labour and safety risks associated with handling fine metal powders. This enables affordable, straightforward and safe 3D printing of stainless steel parts.
Due to the thermoplastic nature of the filament binder materials and the differential thermal cooling during FDM printing, parts printed with BASF Ultrafuse® 316L are prone to deformation. Due to the delicate nature of the green part, care must be taken when removing parts printed with BASF Ultrafuse® 316L to avoid deforming the part. Magigoo Metal provides safe and reliable adhesion during printing and allows easy removal of the printed part by immersion in water, avoiding possible damage to the green part.
HOW:
A build plate temperature of 95-105 °C is recommended for the use of Magigoo Metal with BASF Ultrafuse® 316L, however printing conditions may vary from printer to printer.
- Shake the bottle vigorously.
- Apply to the desired area by pressing the nib onto the bed (activating the inner valve) and spreading as required.
- Print according to the filament/printer manufacturer’s recommendations
- After printing: Immerse the entire build plate in water or soak the part in water. After a short time - usually 30 minutes to 2 hours, depending on the size of the part - the part should come off by itself or be easy to remove with a slight twist.
- Cleaning - Wipe with a damp cloth.
Using this product with filaments other than BASF Ultrafuse 316L may cause excessive adhesion and damage your surface. Follow the instructions in the technical data sheet to achieve the best results.
| Version | Glue Stick |
- Subtotal: 0.00
| Art. No. | Version | Pack Qty. | Price | Quantity | |
|---|---|---|---|---|---|
| 27H9.1 | Glue Stick | 50 ml |
€41.90 |
|
|
|
Available from stock Karlsruhe
Available (note delivery time)
In procurement
No longer available
Delivery date currently unknown
|
|||||
- Subtotal: 0.00