Naar de inhoud springen Naar het navigatiemenu springen

product.details.print
A541

Power Supply EV Series EV3330
Van  ROTH SELECTION
Verwante producten


Low cost power supplies for all applications

The upgraded Consort series with new design - powerful, easy to operate and low priced.
Productdetails

2.902,50 €/VE 

Excl. btw | 1 stuks Per VE

Bestelnr. A541.1

In bestelling
Vrij van verzendingskosten vanaf 250 €
Vanaf 6 VE 2.757,38 €/VE
Vanaf 24 VE 2.612,25 €/VE

Geschikt voor / Toebehoren

1Y9Y
Flatbed electrophoresis unit ROTIPHORESE® PROfessional IEF
Bestelnr. 1Y9Y.1
2.426,30 €  /  1  stuks 
3501
Electrophoresis Unit ROTIPHORESE® PROclamp MINI, complete set
Bestelnr. 3501.1
1.106,20 €  /  1  stuks 
3513_02
Tank Blotting System ROTIPHORESE® PROclamp MINI
Bestelnr. 3513.1
1.071,80 €  /  1  stuks 
2799
Electrophoresis Unit ROTIPHORESE® PROfessional II
Bestelnr. 2799.1
650,40 €  /  1  stuks 
KK58
Semi dry blotter ROTIPHORESE® PROfessional MINI
Bestelnr. KK58.1
1.030,95 €  /  1  stuks 
T843
Adapters for electrophoresis cables and power supplies
vanaf 10,70 €
AE28
Sequencing Electrophoresis Unit
Bestelnr. AE28.1
2.441,35 €  /  1  stuks 

Productdetails


Low cost power supplies for all applications

The upgraded Consort series with new design - powerful, easy to operate and low priced.

Uitrusting algemeen:
  • Small and compact devices
  • On screen help in 4 languages for application and for solving errors
  • Automatic cross-over to show which of the 3 parameters (V, mA, W) is kept constant during the run
  • Automatic recovery after power failure
  • Connection of up to 4 units possible (4 mm sockets)
  • Password protection
  • High safety standard
  • 3 years warranty

Overige eigenschappen van de apparaten (met uitzondering van EV0220):
  • Storing of up to 9 methods possible
  • Timer Mode
  • Setting of a voltage gradient (Voltage Ramp Mode)
  • Data logging of electrophoresis runs (of about 100 hours)
  • Firmware updates via USB interface possible
  • Remote control by PC possible


Power Supply EV Series EV3330 
Geschikt voor

(formerly EV233)
Optimal for DNA-sequencing and IEF using flat bed units.



Levering incl. Adapter pair 4 mm plug/4 mm socket (flat)
Technische informatie
Type EV3330 
Spanningsbereik 0-3000 V
Stroomsterkte 300 mA
Vermogen 300 W
Volturen 0-99,99 kVh
Timer-indicatie 0-99,59 h 
Displaytype LCD, 2 x 16 characters 
Resolutie 1 V
1 mA
1 W
Programma 9 × 9 parameter settings 
Aansluiting Outlets: 4 
Parallel socket pairs: 4 mm (deep) 
Lastweerstand min. 600 ohm
Veiligheidsvoorzieningen Leak recognition 
Omgevingstemperatuur 0-40 °C
B x D x H 31 x 26 x 13 cm
Gewicht 10 kg
Netspanningaansluiting 210-250 V, 50/60 Hz, 360 W 
Power Supply EV Series EV3330
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00
Bestelnr. VE Prijs Hoeveelheid
A541.1 1 stuks 

2.902,50 €

Op voorraad
In bestelling
Niet meer verkrijgbaar
Leveringsdatum onbekend
Geselecteerde hoeveelheid:   0
  1. Tussentotaal:  0.00

Downloads / MSDS

Instruction / Duits

CE-conformiteitsverklaring / Duits

Instruction / Engels

Power Supplies / Engels

Recommendation of Power Supplies suitable for specific electrophoresis units

CE-conformiteitsverklaring / Engels

CE-conformiteitsverklaring / Frans

Algemene informatie

Recommendation of Suitable Power Supplies

Unit for 1–2 Units for 3–4 Units
PROfessional I

PROfessional II Roth-STANDARD, EV2310 Roth-STANDARD, EV2310, EV2650
PROfessional III Roth-STANDARD, EV2310, EV2650 Roth-BLOT, EV2650
PROfessional IV EV2650, EV3610 Roth-BLOT, EV2650, EV3610
PROfessional V Roth-BLOT, EV3610
PROfessional Acetat Roth-STANDARD, EV2310 Roth-STANDARD, EV2650
PROclamp MINI Roth-STANDARD, EV2310 Roth-STANDARD, EV2310, EV2650
PROclamp MINI Wide
PROclamp MAXI Roth-BLOT, EV2310, EV3610 Roth-BLOT, EV2650, EV3150
Sequencing EV3330, EV3620 EV3330, EV3620
IEF EV3150, EV3330 EV3150, EV3330
MINI-Blotting Roth-MINI, EV2310 EV2310, EV3610
MAXI-Blotting Roth-BLOT, EV2310, EV3610 Roth-BLOT, EV3610, EV3020
Electroelution Roth-MINI, EV3610 Roth-STANDARD, EV2650, EV3610, EV3150
When connecting several units, a higher voltage must be applied in order to attain the same intensity of current and output and, subsequently, the same separating capacity.