product.details.print
Silicone anti-foaming emulsion 100, 250 ml
Verwante producten
VE
Verp.
Defoamer
Density (D) ~1 g/cm³
WGK 1
WGK 1
For use in non-aqueous, organic media.
The silicone antifoam emulsion 100 should be inserted into the medium where the foam is created before the working process. The foam already formed is very difficult to destroy afterwards. For defoaming in organic media, a very low concentration of about 2 ppm to 10 ppm is usually required. The defoaming effect or the optimal dosage should be determined in advance in the laboratory. Tip: To facilitate dosing, the silicone emulsion can be pre-diluted in the medium to be defoamed.
The silicone antifoam emulsion 100 should be inserted into the medium where the foam is created before the working process. The foam already formed is very difficult to destroy afterwards. For defoaming in organic media, a very low concentration of about 2 ppm to 10 ppm is usually required. The defoaming effect or the optimal dosage should be determined in advance in the laboratory. Tip: To facilitate dosing, the silicone emulsion can be pre-diluted in the medium to be defoamed.
39,25 €/VE
Excl. btw | 250 ml Per VE
Bestelnr. 1L15.1
In productie
Vrij van verzendingskosten vanaf 250 €
Vanaf 6 VE
37,29 €/VE
Vanaf 24 VE
35,32 €/VE
In het winkelmandje
In het winkelmandje
Silicone anti-foaming emulsion 100
Geselecteerde hoeveelheid:
0
- Tussentotaal: 0.00
In het winkelmandje
| Bestelnr. | VE | Verp. | Prijs | Hoeveelheid | |
|---|---|---|---|---|---|
| 1L15.1 | 250 ml | plastic |
39,25 € |
|
|
| 1L15.2 | 1 l | plastic |
98,80 € |
|
|
| 1L15.3 | 2,5 l | plastic |
188,15 € |
|
|
|
Op voorraad
Beschikbaar
In bestelling
Niet meer verkrijgbaar
Leveringsdatum onbekend
|
|||||
Geselecteerde hoeveelheid:
0
- Tussentotaal: 0.00
In het winkelmandje
Downloads / MSDS
Analysecertificaten
Type analysis
| Defoaming effect (30 sec.) | ≤60 mm |
| Defoaming effect (200 sec.) | ≤100 mm |
| Viscosity (25 °C) | 900-2500 mPas |